Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Creep_(deformation)> ?p ?o. }
Showing items 1 to 42 of
42
with 100 items per page.
- Creep_(deformation) abstract "In materials science, creep (sometimes called cold flow) is the tendency of a solid material to move slowly or deform permanently under the influence of mechanical stresses. It can occur as a result of long-term exposure to high levels of stress that are still below the yield strength of the material. Creep is more severe in materials that are subjected to heat for long periods, and generally increases as they near their melting point. Creep always increases with temperature.[citation needed]The rate of deformation is a function of the material properties, exposure time, exposure temperature and the applied structural load. Depending on the magnitude of the applied stress and its duration, the deformation may become so large that a component can no longer perform its function — for example creep of a turbine blade will cause the blade to contact the casing, resulting in the failure of the blade. Creep is usually of concern to engineers and metallurgists when evaluating components that operate under high stresses or high temperatures. Creep is a deformation mechanism that may or may not constitute a failure mode. For example, moderate creep in concrete is sometimes welcomed because it relieves tensile stresses that might otherwise lead to cracking.Unlike brittle fracture, creep deformation does not occur suddenly upon the application of stress. Instead, strain accumulates as a result of long-term stress. Therefore, creep is a "time-dependent" deformation.The temperature range in which creep deformation may occur differs in various materials. For example, tungsten requires a temperature in the thousands of degrees before creep deformation can occur, while ice will creep at temperatures near 0 °C (32 °F). As a general guideline, the effects of creep deformation generally become noticeable at approximately 30% of the melting point (as measured on a thermodynamic temperature scale such as kelvin or rankine) for metals, and at 40–50% of melting point for ceramics. Virtually any material will creep upon approaching its melting temperature. Since the creep minimum temperature is related to the melting point, creep can be seen at relatively low temperatures for some materials. Plastics and low-melting-temperature metals, including many solders, can begin to creep at room temperature, as can be seen markedly in old lead hot-water pipes. Glacier flow is an example of creep processes in ice.".
- Creep_(deformation) thumbnail 3StageCreep.svg?width=300.
- Creep_(deformation) wikiPageExternalLink ~defmech.
- Creep_(deformation) wikiPageExternalLink creep.html.
- Creep_(deformation) wikiPageExternalLink wtc_briefing_april0505.htm.
- Creep_(deformation) wikiPageExternalLink creep.html.
- Creep_(deformation) wikiPageExternalLink Creepanalysis.
- Creep_(deformation) wikiPageID "681241".
- Creep_(deformation) wikiPageRevisionID "605156140".
- Creep_(deformation) hasPhotoCollection Creep_(deformation).
- Creep_(deformation) subject Category:Deformation.
- Creep_(deformation) subject Category:Elasticity_(physics).
- Creep_(deformation) subject Category:Materials_degradation.
- Creep_(deformation) comment "In materials science, creep (sometimes called cold flow) is the tendency of a solid material to move slowly or deform permanently under the influence of mechanical stresses. It can occur as a result of long-term exposure to high levels of stress that are still below the yield strength of the material. Creep is more severe in materials that are subjected to heat for long periods, and generally increases as they near their melting point.".
- Creep_(deformation) label "Creep (deformation)".
- Creep_(deformation) label "Deformación por fluencia lenta".
- Creep_(deformation) label "Fluage".
- Creep_(deformation) label "Fluência".
- Creep_(deformation) label "Kriechen (Werkstoffe)".
- Creep_(deformation) label "Kruip".
- Creep_(deformation) label "Pełzanie".
- Creep_(deformation) label "Scorrimento viscoso".
- Creep_(deformation) label "Ползучесть материалов".
- Creep_(deformation) label "زحف (خواص المواد)".
- Creep_(deformation) label "クリープ".
- Creep_(deformation) label "蠕变".
- Creep_(deformation) sameAs Kriechen_(Werkstoffe).
- Creep_(deformation) sameAs Ερπυσμός.
- Creep_(deformation) sameAs Deformación_por_fluencia_lenta.
- Creep_(deformation) sameAs Fluage.
- Creep_(deformation) sameAs Scorrimento_viscoso.
- Creep_(deformation) sameAs クリープ.
- Creep_(deformation) sameAs 크리프.
- Creep_(deformation) sameAs Kruip.
- Creep_(deformation) sameAs Pełzanie.
- Creep_(deformation) sameAs Fluência.
- Creep_(deformation) sameAs m.032g5f.
- Creep_(deformation) sameAs Q462188.
- Creep_(deformation) sameAs Q462188.
- Creep_(deformation) wasDerivedFrom Creep_(deformation)?oldid=605156140.
- Creep_(deformation) depiction 3StageCreep.svg.
- Creep_(deformation) isPrimaryTopicOf Creep_(deformation).
