Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Flip_Chip_(trademark)> ?p ?o. }
Showing items 1 to 32 of
32
with 100 items per page.
- Flip_Chip_(trademark) abstract "Flip-Chip modules were used in the DEC PDP-7 (referred to in documentation as the "FLIP CHIP"), PDP-8, PDP-9 and PDP-10, beginning on August 24, 1964. The trademark "Flip-Chip"' was filed on August 27, 1964. Various manuals produced by DEC refer to the modules as "FLIP CHIP", "FLIP-CHIP", "Flip Chip", and "Flip-Chip", with trademark and registered trademark symbols.The first flip-chip modules mated with single-sided 18-contact card edge connectors with contacts on 1/8 inch centers. Circuit boards were 2 7/16 inches wide by 5 inches long, with a handle adding an additional 1/2 inch. Double modules with two connectors side by side were 5 3/16 wide. Later, when two-sided boards were introduced, compatible double-sided 36-contact edge connectors were used, but the basic board dimensions were unchanged.The modules were called Flip-Chips because early versions of some of these modules, for example, the R107 module shown, used hybrid integrated circuits built using flip chip mounting of individual diode chips on a ceramic substrate. Some boards containing flip chip modules were etched and drilled to allow those modules to be replaced by discrete components. At some points during production, conventional discrete components may have replaced these flip-chip devices, but the early use of hybrid integrated circuits allowed DEC to market the PDP-8 as an integrated circuit computer.When DEC began to use monolithic integrated circuits, they continued to refer to their circuit boards as "Flip-Chip" modules, despite the fact that actual flip chip mounting was not used. DEC continued to hold the flip chip trademark until June 6, 1987, when the trademark was allowed to expire.".
- Flip_Chip_(trademark) thumbnail KA10_mod_top.jpg?width=300.
- Flip_Chip_(trademark) wikiPageID "8103051".
- Flip_Chip_(trademark) wikiPageRevisionID "561369416".
- Flip_Chip_(trademark) hasPhotoCollection Flip_Chip_(trademark).
- Flip_Chip_(trademark) subject Category:1964_introductions.
- Flip_Chip_(trademark) subject Category:DEC_hardware.
- Flip_Chip_(trademark) subject Category:Minicomputers.
- Flip_Chip_(trademark) subject Category:Transistorized_computers.
- Flip_Chip_(trademark) type Artifact100021939.
- Flip_Chip_(trademark) type Computer103082979.
- Flip_Chip_(trademark) type Device103183080.
- Flip_Chip_(trademark) type DigitalComputer103196324.
- Flip_Chip_(trademark) type Instrumentality103575240.
- Flip_Chip_(trademark) type Machine103699975.
- Flip_Chip_(trademark) type Minicomputer103770224.
- Flip_Chip_(trademark) type Minicomputers.
- Flip_Chip_(trademark) type Object100002684.
- Flip_Chip_(trademark) type PhysicalEntity100001930.
- Flip_Chip_(trademark) type TransistorizedComputers.
- Flip_Chip_(trademark) type Whole100003553.
- Flip_Chip_(trademark) comment "Flip-Chip modules were used in the DEC PDP-7 (referred to in documentation as the "FLIP CHIP"), PDP-8, PDP-9 and PDP-10, beginning on August 24, 1964. The trademark "Flip-Chip"' was filed on August 27, 1964. Various manuals produced by DEC refer to the modules as "FLIP CHIP", "FLIP-CHIP", "Flip Chip", and "Flip-Chip", with trademark and registered trademark symbols.The first flip-chip modules mated with single-sided 18-contact card edge connectors with contacts on 1/8 inch centers.".
- Flip_Chip_(trademark) label "Flip Chip (marca)".
- Flip_Chip_(trademark) label "Flip Chip (trademark)".
- Flip_Chip_(trademark) sameAs Flip_Chip_(marca).
- Flip_Chip_(trademark) sameAs m.026rl3f.
- Flip_Chip_(trademark) sameAs Q5459660.
- Flip_Chip_(trademark) sameAs Q5459660.
- Flip_Chip_(trademark) sameAs Flip_Chip_(trademark).
- Flip_Chip_(trademark) wasDerivedFrom Flip_Chip_(trademark)?oldid=561369416.
- Flip_Chip_(trademark) depiction KA10_mod_top.jpg.
- Flip_Chip_(trademark) isPrimaryTopicOf Flip_Chip_(trademark).
