Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Load_factor_(electrical)> ?p ?o. }
Showing items 1 to 12 of
12
with 100 items per page.
- Load_factor_(electrical) abstract "In electrical engineering the load factor is defined as the average load divided by the peak load in a specified time period.Typical example of a large commercial electrical bill: KW Demand = 436, KWH Use = 57,200, Number of days in billing cycle = 32Load Factor % = (57,200 KWH / (32 days X 24 hours per day)) / 436 KW X 100% = 17.08%It can be derived from the load profile of the specific device or system of devices. Its value is always less than one because maximum demand is always more than average demand since we will not connect all the loads at a time and that to we will not operate its full capacity. A high load factor means power usage is relatively constant. Low load factor shows that occasionally a high demand is set. To service that peak, capacity is sitting idle for long periods, thereby imposing higher costs on the system. Electrical rates are designed so that customers with high load factor are charged less overall per kWh. This process along with others is called load balancing or peak shaving.The load factor is closely related to and often confused with the demand factor. The major difference to note is that the denominator in the demand factor is fixed depending on the system. Because of this, the demand factor cannot be derived from the load profile but needs the addition of the full load of the system in question.".
- Load_factor_(electrical) wikiPageID "18254249".
- Load_factor_(electrical) wikiPageRevisionID "594081189".
- Load_factor_(electrical) hasPhotoCollection Load_factor_(electrical).
- Load_factor_(electrical) subject Category:Power_engineering.
- Load_factor_(electrical) comment "In electrical engineering the load factor is defined as the average load divided by the peak load in a specified time period.Typical example of a large commercial electrical bill: KW Demand = 436, KWH Use = 57,200, Number of days in billing cycle = 32Load Factor % = (57,200 KWH / (32 days X 24 hours per day)) / 436 KW X 100% = 17.08%It can be derived from the load profile of the specific device or system of devices.".
- Load_factor_(electrical) label "Load factor (electrical)".
- Load_factor_(electrical) sameAs m.04cs31w.
- Load_factor_(electrical) sameAs Q17099407.
- Load_factor_(electrical) sameAs Q17099407.
- Load_factor_(electrical) wasDerivedFrom Load_factor_(electrical)?oldid=594081189.
- Load_factor_(electrical) isPrimaryTopicOf Load_factor_(electrical).