Matches in DBpedia 2014 for { <http://dbpedia.org/resource/.45_Auto_Rim> ?p ?o. }
Showing items 1 to 47 of
47
with 100 items per page.
- .45_Auto_Rim abstract "The .45 Auto Rim, a.k.a 11.5x23R is a rimmed cartridge specifically designed to be fired in revolvers originally chambered for the .45 ACP cartridge. Remington-Peters developed the cartridge for use in the M1917 revolver, large amounts of which had become available as surplus following the end of the Great War. The M1917 had previously been used with half-moon clips that held three rounds of the rimless .45ACP. If half-moon or moon clips are not used with a rimless cartridge in a revolver, they must be ejected by hand with a rod or field-expedient tool like a pencil. In revolver cylinders not engineered to allow .45ACP to headspace properly, as in early production Colt M1917's, the cartridges could slip forward, stopping them from firing. Adding the rim solved both these issues.Loads offered were similar to the standard military loads for the .45ACP, but with fully lead bullets rather than the harder alloys used for .45ACP. This was done to reduce barrel wear in the shallow rifled revolvers in which it was to be used. The .45AR case is stronger than the .45ACP case and has a slightly larger case capacity, allowing for increases in performance. It can deliver similar performance to standard pressure loadings in older, dimensionally larger, revolver cartridge designs like .45 Colt.The round is currently still in production by Corbon in their DPX and Performance Match lines of ammunition and is also manufactured by Georgia Arms.".
- .45_Auto_Rim thumbnail 45_Auto_Rim_comparison.jpg?width=300.
- .45_Auto_Rim wikiPageID "12253214".
- .45_Auto_Rim wikiPageRevisionID "582457276".
- .45_Auto_Rim base "0.4709".
- .45_Auto_Rim btype "FMJ".
- .45_Auto_Rim btype "JHP".
- .45_Auto_Rim btype "LRN".
- .45_Auto_Rim bullet "0.452".
- .45_Auto_Rim bw "160".
- .45_Auto_Rim bw "185".
- .45_Auto_Rim bw "230".
- .45_Auto_Rim caption "On left: Two Remington UMC Auto Rim Factory Loads. On right: two Peters Cartridge Auto Rim Factory Loads".
- .45_Auto_Rim caseLength "0.9004".
- .45_Auto_Rim caseType "Rimmed".
- .45_Auto_Rim designDate "1920".
- .45_Auto_Rim en "264".
- .45_Auto_Rim en "287".
- .45_Auto_Rim en "375".
- .45_Auto_Rim en "392".
- .45_Auto_Rim hasPhotoCollection .45_Auto_Rim.
- .45_Auto_Rim length "1.2646".
- .45_Auto_Rim manufacturer "Corbon".
- .45_Auto_Rim manufacturer "Peters".
- .45_Auto_Rim manufacturer "Remington".
- .45_Auto_Rim name "0.45".
- .45_Auto_Rim neck "0.4685".
- .45_Auto_Rim origin United_States.
- .45_Auto_Rim primer "Boxer Large Pistol".
- .45_Auto_Rim rimDia "0.5154".
- .45_Auto_Rim rimThick "0.0827".
- .45_Auto_Rim type Revolver.
- .45_Auto_Rim vel "1050".
- .45_Auto_Rim vel "750".
- .45_Auto_Rim vel "800".
- .45_Auto_Rim vel "855".
- .45_Auto_Rim subject Category:Pistol_and_rifle_cartridges.
- .45_Auto_Rim comment "The .45 Auto Rim, a.k.a 11.5x23R is a rimmed cartridge specifically designed to be fired in revolvers originally chambered for the .45 ACP cartridge. Remington-Peters developed the cartridge for use in the M1917 revolver, large amounts of which had become available as surplus following the end of the Great War. The M1917 had previously been used with half-moon clips that held three rounds of the rimless .45ACP.".
- .45_Auto_Rim label ".45 Auto Rim".
- .45_Auto_Rim label ".45 Auto Rim".
- .45_Auto_Rim sameAs .45_Auto_Rim.
- .45_Auto_Rim sameAs m.04n7jkb.
- .45_Auto_Rim sameAs Q2806391.
- .45_Auto_Rim sameAs Q2806391.
- .45_Auto_Rim wasDerivedFrom .45_Auto_Rim?oldid=582457276.
- .45_Auto_Rim depiction 45_Auto_Rim_comparison.jpg.
- .45_Auto_Rim isPrimaryTopicOf .45_Auto_Rim.