Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Air_knife> ?p ?o. }
Showing items 1 to 23 of
23
with 100 items per page.
- Air_knife abstract "An air knife is a tool used to blow off liquid or debris from products as they travel on conveyors. Air knives are normally used in manufacturing or as the first step in a recursive recycling process to separate lighter or smaller particles from other components for use in later or subsequent steps, post manufacturing parts drying and conveyor cleaning, part of component cleaning. The knife consists of a high intensity, uniform sheet of laminar airflow sometimes known as streamline flow.An industrial air knife is a pressurized air plenum containing a series of holes or continuous slots through which pressurized air exits in a laminar flow pattern. The exit air velocity then creates an impact air velocity onto the surface of whatever object the air is directed. This impact air velocity can range from a gentle breeze to greater than Mach 0.6 (40,000 ft/min) to alter the surface of a product without mechanical contact.Air knives remove liquids, control the thickness of liquids, dry the liquid coatings, remove foreign particles, cool product surfaces or create a hold down force to assist in the mechanical bonding of materials to the surface. Electrical currents from anti-static bars can also be injected into the exit air knife stream to neutralize the static electricity charge on some surfaces.In the majority of manufacturing applications for air knives, the air knives are stationary while the product passes through the air velocity air stream. In other circumstances, the product is stationary and the air knives move (reciprocate or rotate) over the surface of the stationary product. Although there are very few applications where an air knife can actually cut a product (break mechanical bonds between two points), air knives are often the most efficient method of removing or controlling unwanted or foreign substances on any surface.".
- Air_knife wikiPageID "4021459".
- Air_knife wikiPageRevisionID "599202416".
- Air_knife hasPhotoCollection Air_knife.
- Air_knife subject Category:Pneumatic_tools.
- Air_knife type Artifact100021939.
- Air_knife type Implement103563967.
- Air_knife type Instrumentality103575240.
- Air_knife type Object100002684.
- Air_knife type PhysicalEntity100001930.
- Air_knife type PneumaticTools.
- Air_knife type Tool104451818.
- Air_knife type Whole100003553.
- Air_knife comment "An air knife is a tool used to blow off liquid or debris from products as they travel on conveyors. Air knives are normally used in manufacturing or as the first step in a recursive recycling process to separate lighter or smaller particles from other components for use in later or subsequent steps, post manufacturing parts drying and conveyor cleaning, part of component cleaning.".
- Air_knife label "Air knife".
- Air_knife label "Luftklinge".
- Air_knife sameAs Luftklinge.
- Air_knife sameAs m.0bcyn0.
- Air_knife sameAs Q1875698.
- Air_knife sameAs Q1875698.
- Air_knife sameAs Air_knife.
- Air_knife wasDerivedFrom Air_knife?oldid=599202416.
- Air_knife isPrimaryTopicOf Air_knife.