Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Bede_Wing> ?p ?o. }
Showing items 1 to 42 of
42
with 100 items per page.
- Bede_Wing abstract "The Bede Wing was an inflated hang glider, designed in the 1970s by aeronautical engineer Jim Bede. Intended as a safer alternative to conventional hang gliders, it resembled an early ram-air parachute, but instead was an inflatable structure, that could be filled with air for gliding, or with helium to act as a gas balloon.The aspect ratio of the Bede Wing was low, in the area of 1.8. Fitted with unusually long suspension lines, the Bede Wing had almost no dihedral. It was also reported to have a lower sink rate than conventional hang gliders of the time.Although Bede intended to start full production of the Bede Wing, the project came to naught. However, it foreshadowed the introduction of ram-air inflated paragliders in the mid-1980s.[citation needed]".
- Bede_Wing designer Jim_Bede.
- Bede_Wing manufacturer Bede_Aircraft.
- Bede_Wing unitCost "890.0".
- Bede_Wing wikiPageID "17325258".
- Bede_Wing wikiPageRevisionID "559558768".
- Bede_Wing designer Jim_Bede.
- Bede_Wing hasPhotoCollection Bede_Wing.
- Bede_Wing manufacturer Bede_Aircraft.
- Bede_Wing seeAlso "* Powered parachute".
- Bede_Wing type "Inflatable hang-glider".
- Bede_Wing unitCost "890.0".
- Bede_Wing subject Category:Balloons_(aircraft).
- Bede_Wing subject Category:Bede_aircraft.
- Bede_Wing subject Category:Hang_gliders.
- Bede_Wing subject Category:Inflatable_aircraft.
- Bede_Wing subject Category:Parafoils.
- Bede_Wing type CausalAgent100007347.
- Bede_Wing type HangGlider110159533.
- Bede_Wing type HangGliders.
- Bede_Wing type LivingThing100004258.
- Bede_Wing type Object100002684.
- Bede_Wing type Organism100004475.
- Bede_Wing type Person100007846.
- Bede_Wing type PhysicalEntity100001930.
- Bede_Wing type Rider110529965.
- Bede_Wing type Traveler109629752.
- Bede_Wing type Whole100003553.
- Bede_Wing type YagoLegalActor.
- Bede_Wing type YagoLegalActorGeo.
- Bede_Wing type Aircraft.
- Bede_Wing type MeanOfTransportation.
- Bede_Wing type Product.
- Bede_Wing type DesignedArtifact.
- Bede_Wing comment "The Bede Wing was an inflated hang glider, designed in the 1970s by aeronautical engineer Jim Bede. Intended as a safer alternative to conventional hang gliders, it resembled an early ram-air parachute, but instead was an inflatable structure, that could be filled with air for gliding, or with helium to act as a gas balloon.The aspect ratio of the Bede Wing was low, in the area of 1.8. Fitted with unusually long suspension lines, the Bede Wing had almost no dihedral.".
- Bede_Wing label "Bede Wing".
- Bede_Wing sameAs m.043rhg_.
- Bede_Wing sameAs Q4879043.
- Bede_Wing sameAs Q4879043.
- Bede_Wing sameAs Bede_Wing.
- Bede_Wing wasDerivedFrom Bede_Wing?oldid=559558768.
- Bede_Wing isPrimaryTopicOf Bede_Wing.