Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Connectionless_communication> ?p ?o. }
Showing items 1 to 30 of
30
with 100 items per page.
- Connectionless_communication abstract "Connectionless communication is a data transmission method used in packet switching networks by which each data unit is individually addressed and routed based on information carried in each unit, rather than in the setup information of a prearranged, fixed data channel as in connection-oriented communication.Connectionless communication is often referred to as CL-mode communication.Under connectionless communication between two network end points, a message can be sent from one end point to another without prior arrangement. The device at one end of the communication transmits data addressed to the other, without first ensuring that the recipient is available and ready to receive the data. Some protocols allow for error correction by requested retransmission. Internet Protocol (IP) and User Datagram Protocol (UDP) are connectionless protocols.A packet transmitted in a connectionless mode is frequently called a datagram. Connectionless protocols are usually described as stateless protocols because the end points have no protocol-defined way to remember where they are in a "conversation" of message exchanges.In connection-oriented communication the communicating peers must first establish a logical or physical data channel or connection in a dialog preceding the exchange of user data.The connectionless communications has the advantage over connection-oriented communications in that it has low overhead. It also allows for multicast and broadcast operations in which the same data is transmitted to several recipients in a single transmission. In contrast, a connection is always a unicast (point-to-point) operation.In connectionless transmissions the service provider usually cannot guarantee that there will be no loss, error insertion, misdelivery, duplication, or out-of-sequence delivery of the packet. However, the effect of errors may be reduced by implementing error correction within an application protocol.In connectionless mode no optimizations are possible when sending several data units between the same two peers. By establishing a connection at the beginning of such a data exchange the components (routers, bridges) along the network path would be able to pre-compute (and hence cache) routing-related information, avoiding re-computation for every packet. Network components could also reserve capacity for the transfer of the subsequent data units of a video download, for example.Distinction between connectionless and connection-oriented transmission may take place at several layers of the OSI Reference Model: Transport Layer: TCP is a connection-oriented transport protocol. UDP is connectionless. Network Layer. Data Link Layer: The IEEE 802.2 protocol at the Logical Link Control sublayer of the data link layer may provide both connectionless and connection-oriented services. In fact, some network protocols (such as SNA's Path Control in its early stages) require a connection-oriented data link layer. Others (like IP) do not. (After the appearance of APPN, SNA could operate on a connectionless data link service as well.)↑".
- Connectionless_communication wikiPageID "40950".
- Connectionless_communication wikiPageRevisionID "590746707".
- Connectionless_communication hasPhotoCollection Connectionless_communication.
- Connectionless_communication subject Category:Computer_networking.
- Connectionless_communication subject Category:Internet_architecture.
- Connectionless_communication subject Category:Internet_protocols.
- Connectionless_communication subject Category:Network_protocols.
- Connectionless_communication type Artifact100021939.
- Connectionless_communication type Instrumentality103575240.
- Connectionless_communication type Medium106254669.
- Connectionless_communication type Object100002684.
- Connectionless_communication type PhysicalEntity100001930.
- Connectionless_communication type Telecommunication106271778.
- Connectionless_communication type Telecommunications.
- Connectionless_communication type Whole100003553.
- Connectionless_communication comment "Connectionless communication is a data transmission method used in packet switching networks by which each data unit is individually addressed and routed based on information carried in each unit, rather than in the setup information of a prearranged, fixed data channel as in connection-oriented communication.Connectionless communication is often referred to as CL-mode communication.Under connectionless communication between two network end points, a message can be sent from one end point to another without prior arrangement. ".
- Connectionless_communication label "Comunicazione senza connessione".
- Connectionless_communication label "Connectionless communication".
- Connectionless_communication label "Connectionless".
- Connectionless_communication label "Transmission en mode sans connexion".
- Connectionless_communication sameAs Transmission_en_mode_sans_connexion.
- Connectionless_communication sameAs Comunicazione_senza_connessione.
- Connectionless_communication sameAs Connectionless.
- Connectionless_communication sameAs m.0b6tk.
- Connectionless_communication sameAs Q727896.
- Connectionless_communication sameAs Q727896.
- Connectionless_communication sameAs Connectionless_communication.
- Connectionless_communication wasDerivedFrom Connectionless_communication?oldid=590746707.
- Connectionless_communication isPrimaryTopicOf Connectionless_communication.