Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Copper_cladding> ?p ?o. }
Showing items 1 to 27 of
27
with 100 items per page.
- Copper_cladding abstract "There are four main techniques used today in the UK and mainland Europe for copper cladding a building: Seamed-cladding (typically 0.7mm thick copper sheet on the facade): max 600mm by 4000mm 'seam centres'. Shingle-cladding (typically made from 0.7mm thick copper sheet): max 600mm by 4000mm 'seam centres'. Slot-in panels (typically made from 1.0mm thick copper sheet): max 350mm wide for 1.0mm, by nominal 4 mtr length. Cassettes (typically made from 1.0mm up to 1.5mm thick copper sheet): largest-format cladding elements, more subframing is needed: can be 900mm x nominal 4000mm length.When selecting size of a cladding element, take wind-loadings into account, and also consider the standard sizes available of the sheet (or coil) pre-material, to minimise material wastage through off-cuts. This helps to reduce costs.The choice of which system to use depends on the aesthetic effect required, and building geometry can also have an influence on the choice.Copper cladding is very durable, lightweight compared to other materials and techniques, and at the end of the building life is also 100% recyclable.Given the recent publicity about high metal prices, it may be surprising for most people to learn that copper is a very cost-effective cladding and roofing material. With good building design, materials choice and craftsmanship, copper roofing / facade cladding can be cheaper than slates or concrete tiles, especially when one takes into account the lasting colour, durability, maintenance-free and lightweight nature of the cladding.Because the UK code of practice for "hard metal" cladding (as opposed to lead cladding) is quite old - CP143: part 12 (1970) - the major manufacturers have to provide detailed technical advice and information for architects, designers and builders, and cultivate skilled installers with years of experience to draw on.Typically, an installer of hard metal roofing and cladding must put in around 8–10 years on-the-job in order to achieve a respectable experience on a work site.".
- Copper_cladding thumbnail Harvington_Parish_Church_-_geograph.org.uk_-_58078.jpg?width=300.
- Copper_cladding wikiPageExternalLink copper-cladding.html.
- Copper_cladding wikiPageID "19696006".
- Copper_cladding wikiPageRevisionID "593349099".
- Copper_cladding hasPhotoCollection Copper_cladding.
- Copper_cladding subject Category:Building_materials.
- Copper_cladding subject Category:Walls.
- Copper_cladding type Artifact100021939.
- Copper_cladding type Object100002684.
- Copper_cladding type Partition103894379.
- Copper_cladding type PhysicalEntity100001930.
- Copper_cladding type Structure104341686.
- Copper_cladding type Wall104546855.
- Copper_cladding type Walls.
- Copper_cladding type Whole100003553.
- Copper_cladding type YagoGeoEntity.
- Copper_cladding type YagoPermanentlyLocatedEntity.
- Copper_cladding comment "There are four main techniques used today in the UK and mainland Europe for copper cladding a building: Seamed-cladding (typically 0.7mm thick copper sheet on the facade): max 600mm by 4000mm 'seam centres'. Shingle-cladding (typically made from 0.7mm thick copper sheet): max 600mm by 4000mm 'seam centres'. Slot-in panels (typically made from 1.0mm thick copper sheet): max 350mm wide for 1.0mm, by nominal 4 mtr length.".
- Copper_cladding label "Copper cladding".
- Copper_cladding sameAs m.04n2wp7.
- Copper_cladding sameAs Q17009089.
- Copper_cladding sameAs Q17009089.
- Copper_cladding sameAs Copper_cladding.
- Copper_cladding wasDerivedFrom Copper_cladding?oldid=593349099.
- Copper_cladding depiction Harvington_Parish_Church_-_geograph.org.uk_-_58078.jpg.
- Copper_cladding isPrimaryTopicOf Copper_cladding.