Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Die_casting> ?p ?o. }
Showing items 1 to 32 of
32
with 100 items per page.
- Die_casting abstract "Die casting is a metal casting process that is characterized by forcing molten metal under high pressure into a mold cavity. The mold cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mold during the process. Most die castings are made from non-ferrous metals, specifically zinc, copper, aluminium, magnesium, lead, pewter and tin based alloys. Depending on the type of metal being cast, a hot- or cold-chamber machine is used. The casting equipment and the metal dies represent large capital costs and this tends to limit the process to high volume production. Manufacture of parts using die casting is relatively simple, involving only four main steps, which keeps the incremental cost per item low. It is especially suited for a large quantity of small to medium sized castings, which is why die casting produces more castings than any other casting process. Die castings are characterized by a very good surface finish (by casting standards) and dimensional consistency.Two variants are pore-free die casting, which is used to eliminate gas porosity defects; and direct injection die casting, which is used with zinc castings to reduce scrap and increase yield.".
- Die_casting thumbnail BMW_6-cylinder_block_Al-Mg.jpg?width=300.
- Die_casting wikiPageExternalLink ?id=Nz2wXvmkAF0C&pg=PT207.
- Die_casting wikiPageExternalLink books?id=QDPLgfCSoqoC.
- Die_casting wikiPageExternalLink faq.
- Die_casting wikiPageExternalLink general-die-casting-design-data-sheet.
- Die_casting wikiPageExternalLink 1541_tolerances_for_aluminium_die_castings.pdf.
- Die_casting wikiPageID "669733".
- Die_casting wikiPageRevisionID "603059707".
- Die_casting hasPhotoCollection Die_casting.
- Die_casting subject Category:Casting_(manufacturing).
- Die_casting comment "Die casting is a metal casting process that is characterized by forcing molten metal under high pressure into a mold cavity. The mold cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mold during the process. Most die castings are made from non-ferrous metals, specifically zinc, copper, aluminium, magnesium, lead, pewter and tin based alloys.".
- Die_casting label "Die casting".
- Die_casting label "Druckguss".
- Die_casting label "Fundição injetada".
- Die_casting label "Odlewanie kokilowe".
- Die_casting label "Pressofusione".
- Die_casting label "Литьё металлов под давлением".
- Die_casting label "سباكة في قوالب".
- Die_casting label "ダイカスト".
- Die_casting label "壓鑄".
- Die_casting sameAs Druckguss.
- Die_casting sameAs Pressofusione.
- Die_casting sameAs ダイカスト.
- Die_casting sameAs Odlewanie_kokilowe.
- Die_casting sameAs Fundição_injetada.
- Die_casting sameAs m.02rfdcc.
- Die_casting sameAs Q7397685.
- Die_casting sameAs Q7397685.
- Die_casting wasDerivedFrom Die_casting?oldid=603059707.
- Die_casting depiction BMW_6-cylinder_block_Al-Mg.jpg.
- Die_casting isPrimaryTopicOf Die_casting.