Matches in DBpedia 2014 for { <http://dbpedia.org/resource/EMC_E3> ?p ?o. }
Showing items 1 to 60 of
60
with 100 items per page.
- EMC_E3 height "4572.0".
- EMC_E3 length "21336.0".
- EMC_E3 width "3048.0".
- EMC_E3 abstract "The EMC E3 was a 2,000 horsepower (1,500 kW), A1A-A1A passenger train locomotive manufactured by Electro-Motive Corporation of La Grange, Illinois. The EMC demonstrator #822 was released from La Grange for test on September 12, 1938. The cab version, or E3A, was manufactured from September 1938 to June 1940, and 17 were produced. The booster version, or E3B, was manufactured in March 1939 and September 1939, and 2 were produced. The 2,000 h.p. was achieved by putting two 1,000 hp, 12-cylinder, model 567 engines in the engine compartment. Each engine drove its own electrical generator to power the traction motors. The E3 was the fourth model in a long line of passenger diesels of similar design known as EMD E-units.Compared with passenger locomotives made later by EMD, the noses of the E3, E4, E5,and E6 cab units had pronounced slants when viewed from the side. Therefore, these four models have been nicknamed "slant nose" units. Later E models had the "bulldog nose" of the F series.".
- EMC_E3 activeYearsEndYear "1940".
- EMC_E3 activeYearsStartYear "1938".
- EMC_E3 builder Electro-Motive_Diesel.
- EMC_E3 cylinderCount "2".
- EMC_E3 height "4.572".
- EMC_E3 length "21.336".
- EMC_E3 numberBuilt "17".
- EMC_E3 thumbnail Atlantic_Coast_Line_501.jpg?width=300.
- EMC_E3 width "3.048".
- EMC_E3 wikiPageExternalLink www.nctrans.org.
- EMC_E3 wikiPageID "1099543".
- EMC_E3 wikiPageRevisionID "574378635".
- EMC_E3 aarwheels "A1A-A1A".
- EMC_E3 aspiration Roots-type_supercharger.
- EMC_E3 builddate "September 1938 – June 1940".
- EMC_E3 builder Electro-Motive_Diesel.
- EMC_E3 buildmodel "E3".
- EMC_E3 caption "ACL #501 at the North Carolina Transportation Museum.".
- EMC_E3 cylindercount "V12".
- EMC_E3 displacement "each".
- EMC_E3 disposition "one preserved and in mostly static display at the North Carolina Transportation Museum".
- EMC_E3 enginetype "Two-stroke diesel".
- EMC_E3 fuelcap "1200".
- EMC_E3 generator "EMC D-4".
- EMC_E3 hasPhotoCollection EMC_E3.
- EMC_E3 length "between couplers".
- EMC_E3 minimumcurve "21".
- EMC_E3 name "EMC E3".
- EMC_E3 poweroutput "total".
- EMC_E3 powertype "Diesel-electric".
- EMC_E3 primemover "EMC 567".
- EMC_E3 rpmrange "800".
- EMC_E3 totalproduction "17".
- EMC_E3 tractionmotors "EMC D-7".
- EMC_E3 trucks "EMC Blomberg A-1-A passenger".
- EMC_E3 subject Category:A1A-A1A_locomotives.
- EMC_E3 subject Category:Diesel_locomotives_of_the_United_States.
- EMC_E3 subject Category:Electro-Motive_Diesel_locomotives.
- EMC_E3 subject Category:Locomotives_with_cabless_variants.
- EMC_E3 subject Category:Passenger_locomotives.
- EMC_E3 subject Category:Railway_locomotives_introduced_in_1939.
- EMC_E3 type Locomotive.
- EMC_E3 type MeanOfTransportation.
- EMC_E3 type Product.
- EMC_E3 type DesignedArtifact.
- EMC_E3 comment "The EMC E3 was a 2,000 horsepower (1,500 kW), A1A-A1A passenger train locomotive manufactured by Electro-Motive Corporation of La Grange, Illinois. The EMC demonstrator #822 was released from La Grange for test on September 12, 1938. The cab version, or E3A, was manufactured from September 1938 to June 1940, and 17 were produced. The booster version, or E3B, was manufactured in March 1939 and September 1939, and 2 were produced. The 2,000 h.p.".
- EMC_E3 label "EMC E3".
- EMC_E3 label "EMC E3".
- EMC_E3 sameAs EMC_E3.
- EMC_E3 sameAs m.045z35.
- EMC_E3 sameAs Q3045958.
- EMC_E3 sameAs Q3045958.
- EMC_E3 wasDerivedFrom EMC_E3?oldid=574378635.
- EMC_E3 depiction Atlantic_Coast_Line_501.jpg.
- EMC_E3 isPrimaryTopicOf EMC_E3.
- EMC_E3 name "EMC E3".