Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Input/Output_Configuration_Program> ?p ?o. }
Showing items 1 to 36 of
36
with 100 items per page.
- Output_Configuration_Program abstract "In the original S/360 and S/370 architectures, each processor had its own set of I/O channels and addressed I/O devices with a 12-bit cuu address, containing a 4-bit channel number and an 8-bit unit (device) number to be sent on the channel bus in order to select the device; the operating system had to be configured to reflect the processor and cuu address for each device. The operating system had logic to queue pending I/O on each channel and to handle selection of alternate channels. Initiating an I/O to a channel on a different processor required causing a shoulder tap interrupt on the other processor so that it could initiate the I/O.Starting with the IBM 3081 and IBM 4381 in S/370-Extended Architecture mode, IBM changed the I/O architecture to allow the Channel Subsystem to handle the channel scheduling that the operating system had to handle in S/370 mode. The new I/O architecture used a 16-bit Channel Path Id (CHPID); the Channel Subsystem was responsible for mapping the CHPID to the channel and device numbers, for queuing I/O requests and for selecting from the available paths. The installation was responsible for defining the Input/Output Configuration Data Sets (IOCDS's), and the operator could select a specific IOCDS as part of a power on reset (POR). Input/Output Configuration Program (IOCP) is a program for IBM mainframes that compiles a description of the Channel Subsystem and LPAR configuration, optionally loading it into an Input/Output Configuration Data Set (IOCDS); it recognizes the syntax of MVS Configuration Program (MVSCP) input, and there is no need to maintain separate input files.The direct use of IOCP and MVSCP has been mostly supplanted by Hardware Configuration Definition (HCD).".
- Output_Configuration_Program computingPlatform 370.
- Output_Configuration_Program wikiPageExternalLink CCONTENTS.
- Output_Configuration_Program wikiPageExternalLink CCONTENTS.
- Output_Configuration_Program wikiPageID "27387355".
- Output_Configuration_Program wikiPageRevisionID "594230701".
- Output_Configuration_Program author "IBM".
- Output_Configuration_Program developer "IBM".
- Output_Configuration_Program hasPhotoCollection Output_Configuration_Program.
- Output_Configuration_Program license "Proprietary".
- Output_Configuration_Program name "Input/Output Configuration Program".
- Output_Configuration_Program operatingSystem "stand alone, z/OS, z/VM, z/VSE".
- Output_Configuration_Program platform 370.
- Output_Configuration_Program title "Input/Output Configuration Program".
- Output_Configuration_Program subject Category:IBM_mainframe_operating_systems.
- Output_Configuration_Program subject Category:IBM_mainframe_technology.
- Output_Configuration_Program type Abstraction100002137.
- Output_Configuration_Program type Code106355894.
- Output_Configuration_Program type CodingSystem106353757.
- Output_Configuration_Program type Communication100033020.
- Output_Configuration_Program type Software106566077.
- Output_Configuration_Program type Writing106359877.
- Output_Configuration_Program type WrittenCommunication106349220.
- Output_Configuration_Program type Software.
- Output_Configuration_Program type Work.
- Output_Configuration_Program type CreativeWork.
- Output_Configuration_Program type InformationEntity.
- Output_Configuration_Program comment "In the original S/360 and S/370 architectures, each processor had its own set of I/O channels and addressed I/O devices with a 12-bit cuu address, containing a 4-bit channel number and an 8-bit unit (device) number to be sent on the channel bus in order to select the device; the operating system had to be configured to reflect the processor and cuu address for each device. The operating system had logic to queue pending I/O on each channel and to handle selection of alternate channels.".
- Output_Configuration_Program label "Input/Output Configuration Program".
- Output_Configuration_Program sameAs m.0cz86r7.
- Output_Configuration_Program sameAs Q6036761.
- Output_Configuration_Program sameAs Q6036761.
- Output_Configuration_Program sameAs Output_Configuration_Program.
- Output_Configuration_Program wasDerivedFrom Output_Configuration_Program?oldid=594230701.
- Output_Configuration_Program isPrimaryTopicOf Output_Configuration_Program.
- Output_Configuration_Program name "Input/Output Configuration Program".