Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Palm_Serial> ?p ?o. }
Showing items 1 to 50 of
50
with 100 items per page.
- Palm_Serial abstract "The Palm Serial were 3 successive proprietary 10-pin Serial connectors on the bottom of the first 3 series of models of PDAs from Palm, Inc. to provide serial communications: 1) pre-IrDA models; 2) the 1st IrDA models; 3) the 1st thin, metal-body models. In addition to Palm's models (and rebranded models like the IBM WorkPad series) similar serial connectors have been used in the Ericsson MC16 Palmtop and Handera equipment.Pressing the HotSync button located at the base of the cradle closes a circuit between pins 2 and 7 which causes the activation of MUN2214 NPN transistor connected to pin 38 of the Motorola Dragonball CPU that provides a low signal on the IRQ1 UART, triggering the HotSync process.On pin 8 when a modem connects to the Palm similarly closes a circuit pin 2 to activate another MUN2214 NPN transistor connected to pin 32 (GPIO UART) of the CPU to notify the presence of the modem.".
- Palm_Serial thumbnail Palm_Serial.png?width=300.
- Palm_Serial wikiPageExternalLink palm.
- Palm_Serial wikiPageExternalLink PCPD-serial.html.
- Palm_Serial wikiPageID "29400556".
- Palm_Serial wikiPageRevisionID "546026143".
- Palm_Serial designer Palm,_Inc..
- Palm_Serial hasPhotoCollection Palm_Serial.
- Palm_Serial name "Palm Serial Connector".
- Palm_Serial numPins "10".
- Palm_Serial pin "CTS".
- Palm_Serial pin "GND".
- Palm_Serial pin "HOTSYNC".
- Palm_Serial pin "ID".
- Palm_Serial pin "N/C".
- Palm_Serial pin "RS-232".
- Palm_Serial pin "RTS".
- Palm_Serial pin "RxD".
- Palm_Serial pin "TxD".
- Palm_Serial pin "VCC".
- Palm_Serial pin10Name "Signal Ground".
- Palm_Serial pin1Name "DTR output nonstandard".
- Palm_Serial pin2Name "+3.3 V".
- Palm_Serial pin3Name "RS-232 input, Signal T RxD".
- Palm_Serial pin4Name "RTS RS-232 output".
- Palm_Serial pin5Name "RS-232 output, Signal R TxD".
- Palm_Serial pin6Name "CTS RS-232 input".
- Palm_Serial pin7Name "HotSync IRQ - +3.3 V to press the HotSync button".
- Palm_Serial pin8Name "Peripheral id. The Palm modem connects this pin to pin 2 to 20 kOhms ID".
- Palm_Serial pin9Name "is not connected. In the Palm III, 5 V DC output".
- Palm_Serial supersededBy Palm_Universal_Connector.
- Palm_Serial type "Communication, power supply".
- Palm_Serial subject Category:Palm,_Inc..
- Palm_Serial type Artifact100021939.
- Palm_Serial type Connection103091374.
- Palm_Serial type Instrumentality103575240.
- Palm_Serial type Object100002684.
- Palm_Serial type PhysicalEntity100001930.
- Palm_Serial type Whole100003553.
- Palm_Serial comment "The Palm Serial were 3 successive proprietary 10-pin Serial connectors on the bottom of the first 3 series of models of PDAs from Palm, Inc. to provide serial communications: 1) pre-IrDA models; 2) the 1st IrDA models; 3) the 1st thin, metal-body models.".
- Palm_Serial label "Palm Serial".
- Palm_Serial label "Palm Serial".
- Palm_Serial sameAs Palm_Serial.
- Palm_Serial sameAs m.0ds7lth.
- Palm_Serial sameAs Q7128061.
- Palm_Serial sameAs Q7128061.
- Palm_Serial sameAs Palm_Serial.
- Palm_Serial wasDerivedFrom Palm_Serial?oldid=546026143.
- Palm_Serial depiction Palm_Serial.png.
- Palm_Serial isPrimaryTopicOf Palm_Serial.
