Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Plate_detector_(radio)> ?p ?o. }
Showing items 1 to 29 of
29
with 100 items per page.
- Plate_detector_(radio) abstract "A plate detector (or anode-bend detector) is a vacuum tube detector circuit used in A.M. radios, although the term is sometimes extended to transistor circuits that similarly rely upon distorted amplification to enhance one half of the received signal over the other. This circuit employs a tube with an indirectly heated cathode, typically a medium-mu triode, or a tetrode or pentode with a sharp cut-off control grid. Partial rectification of R.F. signals occurs in the plate of the detector tube if it is forced into its non-linear region at roughly the zero crossing point of the input signal. This differs from a grid-leak detector, which achieves rectification in the control grid. It also differs from the diode detector circuit commonly used to provide both R.F. rectification and automatic volume control (A.V.C.) bias to the R.F. amplifier tubes.".
- Plate_detector_(radio) wikiPageExternalLink M0017372.pdf.
- Plate_detector_(radio) wikiPageExternalLink M0012864.pdf.
- Plate_detector_(radio) wikiPageID "19215181".
- Plate_detector_(radio) wikiPageRevisionID "600889220".
- Plate_detector_(radio) hasPhotoCollection Plate_detector_(radio).
- Plate_detector_(radio) subject Category:Analog_circuits.
- Plate_detector_(radio) subject Category:Radio_technology.
- Plate_detector_(radio) subject Category:Vacuum_tubes.
- Plate_detector_(radio) type AnalogCircuits.
- Plate_detector_(radio) type Artifact100021939.
- Plate_detector_(radio) type Circuit103033362.
- Plate_detector_(radio) type Device103183080.
- Plate_detector_(radio) type ElectricalDevice103269401.
- Plate_detector_(radio) type ElectronicDevice103277771.
- Plate_detector_(radio) type Instrumentality103575240.
- Plate_detector_(radio) type Object100002684.
- Plate_detector_(radio) type PhysicalEntity100001930.
- Plate_detector_(radio) type Tube104494204.
- Plate_detector_(radio) type VacuumTubes.
- Plate_detector_(radio) type Whole100003553.
- Plate_detector_(radio) comment "A plate detector (or anode-bend detector) is a vacuum tube detector circuit used in A.M. radios, although the term is sometimes extended to transistor circuits that similarly rely upon distorted amplification to enhance one half of the received signal over the other. This circuit employs a tube with an indirectly heated cathode, typically a medium-mu triode, or a tetrode or pentode with a sharp cut-off control grid. Partial rectification of R.F.".
- Plate_detector_(radio) label "Plate detector (radio)".
- Plate_detector_(radio) sameAs m.04lgr58.
- Plate_detector_(radio) sameAs Q7202197.
- Plate_detector_(radio) sameAs Q7202197.
- Plate_detector_(radio) sameAs Plate_detector_(radio).
- Plate_detector_(radio) wasDerivedFrom Plate_detector_(radio)?oldid=600889220.
- Plate_detector_(radio) isPrimaryTopicOf Plate_detector_(radio).