Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Pressurized_wall> ?p ?o. }
Showing items 1 to 23 of
23
with 100 items per page.
- Pressurized_wall abstract "Pressurized walls are temporary walls built with reams of 1⁄2" (6 mm) to 5⁄8" (16 mm) sheet rock (plasterboard), metal 2 × 3s (approx. 5 × 7 cm) or 2 × 4s, or taped, plastered and compounded. Most installation companies utilize LATTICE strips of wood to cover the joints of the above drywall. After the frame-out process, 11⁄4" (32 mm) sheet rock screws are used to attach the drywall to the pressurized 2×4s that contact the floor, the ceiling and the sides of the property's walls. In order to prevent structural or architectural damage, only T-nuts and leveling screw pads are used on those studs. No additional fasteners or adhesives are used to add stability to the frame work.Generally, hollow core doors or French style doors are recommended to prevent weight overload and/or shifting of a pressurized wall. Completed walls are often painted the same color as existing walls. Many landlords used to allow tenants to construct pressurized walls as long as they remove the walls before vacating the apartment. As a result, pressurized walls became especially popular in New York City, where the high cost of real estate leads many tenants to use such walls to create extra bedrooms, home offices or walk-in closets. Today, more landlords use bookcase dividers in New York City with or without shelving. These dividers are built with 1 X 6 wood and drywall. Be cautious of a wall that is built with metal studs that does not reach the ceiling, most definitely it is affixed to the floor and side walls.In mid-2010, New York City authorities started demanding that such walls be removed because they contravene building codes and can pose safety hazards.However, no local law has been passed banning the use/installation/leasing of these pressurized walls aka pressurized partitions as the gray area has not been clearly defined by the 2008 printed/issued NYC Building Code.".
- Pressurized_wall wikiPageID "5795808".
- Pressurized_wall wikiPageRevisionID "606356085".
- Pressurized_wall hasPhotoCollection Pressurized_wall.
- Pressurized_wall subject Category:Walls.
- Pressurized_wall type Artifact100021939.
- Pressurized_wall type Object100002684.
- Pressurized_wall type Partition103894379.
- Pressurized_wall type PhysicalEntity100001930.
- Pressurized_wall type Structure104341686.
- Pressurized_wall type Wall104546855.
- Pressurized_wall type Walls.
- Pressurized_wall type Whole100003553.
- Pressurized_wall type YagoGeoEntity.
- Pressurized_wall type YagoPermanentlyLocatedEntity.
- Pressurized_wall comment "Pressurized walls are temporary walls built with reams of 1⁄2" (6 mm) to 5⁄8" (16 mm) sheet rock (plasterboard), metal 2 × 3s (approx. 5 × 7 cm) or 2 × 4s, or taped, plastered and compounded. Most installation companies utilize LATTICE strips of wood to cover the joints of the above drywall. After the frame-out process, 11⁄4" (32 mm) sheet rock screws are used to attach the drywall to the pressurized 2×4s that contact the floor, the ceiling and the sides of the property's walls.".
- Pressurized_wall label "Pressurized wall".
- Pressurized_wall sameAs m.0f52qj.
- Pressurized_wall sameAs Q7241749.
- Pressurized_wall sameAs Q7241749.
- Pressurized_wall sameAs Pressurized_wall.
- Pressurized_wall wasDerivedFrom Pressurized_wall?oldid=606356085.
- Pressurized_wall isPrimaryTopicOf Pressurized_wall.