Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Reflow_soldering> ?p ?o. }
Showing items 1 to 26 of
26
with 100 items per page.
- Reflow_soldering abstract "Reflow soldering is a process in which a solder paste (a sticky mixture of powdered solder and flux) is used to temporarily attach one or several electrical components to their contact pads, after which the entire assembly is subjected to controlled heat, which melts the solder, permanently connecting the joint. Heating may be accomplished by passing the assembly through a reflow oven or under an infrared lamp or by soldering individual joints with a hot air pencil. Reflow soldering is the most common method of attaching surface mount components to a circuit board, although it can also be used for through-hole components by filling the holes with solder paste and inserting the component leads through the paste. Because wave soldering can be simpler and cheaper, reflow is not generally used on pure through-hole boards. When used on boards containing a mix of SMT and THT components, through-hole reflow allows the wave soldering step to be eliminated from the assembly process, potentially reducing assembly costs.The goal of the reflow process is to melt the solder and heat the adjoining surfaces, without overheating and damaging the electrical components. In the conventional reflow soldering process, there are usually four stages, called "zones", each having a distinct thermal profile: preheat, thermal soak (often shortened to just soak), reflow, and cooling.".
- Reflow_soldering thumbnail RSS_Components_of_a_Profile1.svg?width=300.
- Reflow_soldering wikiPageExternalLink pihrtechnology.com.
- Reflow_soldering wikiPageExternalLink ftopic58_reflow-soldering-.html.
- Reflow_soldering wikiPageID "1407684".
- Reflow_soldering wikiPageRevisionID "591942818".
- Reflow_soldering hasPhotoCollection Reflow_soldering.
- Reflow_soldering subject Category:Brazing_and_soldering.
- Reflow_soldering subject Category:Electronics_manufacturing.
- Reflow_soldering comment "Reflow soldering is a process in which a solder paste (a sticky mixture of powdered solder and flux) is used to temporarily attach one or several electrical components to their contact pads, after which the entire assembly is subjected to controlled heat, which melts the solder, permanently connecting the joint. Heating may be accomplished by passing the assembly through a reflow oven or under an infrared lamp or by soldering individual joints with a hot air pencil.".
- Reflow_soldering label "Reflow soldering".
- Reflow_soldering label "Reflow-Löten".
- Reflow_soldering label "Saldatura per rifusione".
- Reflow_soldering label "Soldadura por refusión".
- Reflow_soldering label "リフロー".
- Reflow_soldering sameAs Pájení_přetavením.
- Reflow_soldering sameAs Reflow-Löten.
- Reflow_soldering sameAs Soldadura_por_refusión.
- Reflow_soldering sameAs Saldatura_per_rifusione.
- Reflow_soldering sameAs リフロー.
- Reflow_soldering sameAs m.04_3f8.
- Reflow_soldering sameAs Q2136790.
- Reflow_soldering sameAs Q2136790.
- Reflow_soldering wasDerivedFrom Reflow_soldering?oldid=591942818.
- Reflow_soldering depiction RSS_Components_of_a_Profile1.svg.
- Reflow_soldering isPrimaryTopicOf Reflow_soldering.