Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Rover_P3> ?p ?o. }
Showing items 1 to 65 of
65
with 100 items per page.
- Rover_P3 wheelbase "2794.0".
- Rover_P3 height "1600.2".
- Rover_P3 length "4368.8".
- Rover_P3 weight "1360.8".
- Rover_P3 width "1651.0".
- Rover_P3 abstract "The Rover P3 is a car that was produced by the Rover company in 1948 and 1949. For the post-war market Rover had a new engine that had been in preparation since the late 1930s with overhead inlet and side exhaust valves. It was made in two versions for the car, the "60" had a four-cylinder unit of 1595 cc and the "75" had a six-cylinder version of 2103 cc. The gearbox and traditional Rover freewheel were kept unchanged from the previous model.To go with the engine a new car was prepared. Although the body was similar in styling to the Rover 12 and 16, many of the body panels were in fact new but the wings and bonnet from the 12 were carried over. The car was 0.5 inch (12 mm) wider outside than the 16 but by making better use of space this translated to 2.5 inches (60 mm) inside. It was 4.5 inches (115 mm) shorter in the wheelbase. Also new, and a first for a Rover, was independent front suspension but the brakes remained a hydraulic/mechanical hybrid system. Rather than having a complete chassis, the new frame, which was a box section, was stopped short of the rear axle and the rear semi-elliptic springs were attached to the body. This allowed the rear axle travel to be increased and an improved ride resulted.Two body styles were available, a six light saloon and four light "Sports Saloon".The cars were expensive at £1080 for the "60" and £1106 for the "75", and with early post-war production problems and material shortages it was never intended that the cars would be produced in large numbers. Eventually, 1274 of the "60" and 7837 of the "75" models were made before the car was replaced by the all-new P4 of 1949.The engine and gearbox from the car were also used as the basis for those in the original Land Rover Series. About six "75" models were produced with triple SU carburettors - a throw back to Rover's pre-war 'Speed' performance models; one survivor has an over-bored 2,400 cc engine; the basis of the Marauder 100 engine.".
- Rover_P3 bodyStyle Sedan_(automobile).
- Rover_P3 designCompany Gordon_Bashford.
- Rover_P3 designer Gordon_Bashford.
- Rover_P3 engine Rover_P3__1.
- Rover_P3 engine Rover_P3__2.
- Rover_P3 height "1.6002".
- Rover_P3 layout Front-engine,_rear-wheel-drive_layout.
- Rover_P3 length "4.3688".
- Rover_P3 manufacturer Rover_(marque).
- Rover_P3 predecessor Rover_16.
- Rover_P3 productionEndYear "1949".
- Rover_P3 productionStartYear "1948".
- Rover_P3 successor Rover_P4.
- Rover_P3 thumbnail Rover_P3-75_1949.jpg?width=300.
- Rover_P3 transmission "4-speed manual".
- Rover_P3 weight "1360800.0".
- Rover_P3 wheelbase "2.794".
- Rover_P3 width "1.651".
- Rover_P3 wikiPageID "6654022".
- Rover_P3 wikiPageRevisionID "587987830".
- Rover_P3 bodyStyle "4".
- Rover_P3 caption "1949".
- Rover_P3 designer Gordon_Bashford.
- Rover_P3 engine "1.6".
- Rover_P3 engine "2.1".
- Rover_P3 hasPhotoCollection Rover_P3.
- Rover_P3 layout Front-engine,_rear-wheel-drive_layout.
- Rover_P3 manufacturer Rover_(marque).
- Rover_P3 name "Rover P3".
- Rover_P3 predecessor Rover_16.
- Rover_P3 production "1948".
- Rover_P3 production "9111".
- Rover_P3 successor Rover_P4.
- Rover_P3 transmission "4".
- Rover_P3 weight "approx".
- Rover_P3 wordnet_type synset-car-noun-1.
- Rover_P3 subject Category:1940s_automobiles.
- Rover_P3 subject Category:Rear-wheel-drive_vehicles.
- Rover_P3 subject Category:Rover_vehicles.
- Rover_P3 subject Category:Sedans.
- Rover_P3 subject Category:Vehicles_introduced_in_1948.
- Rover_P3 type Automobile.
- Rover_P3 type MeanOfTransportation.
- Rover_P3 type Product.
- Rover_P3 type Automobile.
- Rover_P3 type DesignedArtifact.
- Rover_P3 comment "The Rover P3 is a car that was produced by the Rover company in 1948 and 1949. For the post-war market Rover had a new engine that had been in preparation since the late 1930s with overhead inlet and side exhaust valves. It was made in two versions for the car, the "60" had a four-cylinder unit of 1595 cc and the "75" had a six-cylinder version of 2103 cc. The gearbox and traditional Rover freewheel were kept unchanged from the previous model.To go with the engine a new car was prepared.".
- Rover_P3 label "Rover P3".
- Rover_P3 label "Rover P3".
- Rover_P3 label "Rover P3".
- Rover_P3 sameAs Rover_P3.
- Rover_P3 sameAs Rover_P3.
- Rover_P3 sameAs m.0gg6x_.
- Rover_P3 sameAs Q1473379.
- Rover_P3 sameAs Q1473379.
- Rover_P3 wasDerivedFrom Rover_P3?oldid=587987830.
- Rover_P3 depiction Rover_P3-75_1949.jpg.
- Rover_P3 isPrimaryTopicOf Rover_P3.
- Rover_P3 name "Rover P3".