Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Semi-solid_metal_casting> ?p ?o. }
Showing items 1 to 20 of
20
with 100 items per page.
- Semi-solid_metal_casting abstract "Semi-solid metal casting (SSM) is a near net shape variant of die casting. The process is used with non-ferrous metals, such as aluminium, copper, and magnesium. The process combines the advantages of casting and forging. The process is named after the fluid property thixotropy, which is the phenomenon that allows this process to work. Simply, thixotropic fluids shear when the material flows, but thicken when standing. The potential for this type of process was first recognized in the early 1970s. There are four different processes: thixocasting, rheocasting, thixomolding, and SIMA.SSM is done at a temperature that puts the metal between its liquidus and solidus temperature. Ideally, the metal should be 30 to 65% solid. The metal must have a low viscosity to be usable, and to reach this low viscosity the material needs a globular primary surrounded by the liquid phase. The temperature range possible depends on the material and for aluminum alloys is 5–10 °C, but for narrow melting range copper alloys can be only several tenths of a degree.Semi-solid casting is typically used for high-end castings. For aluminum alloys typical parts include engine suspension mounts, air manifold sensor harness, engine blocks and oil pump filter housing.".
- Semi-solid_metal_casting wikiPageExternalLink semi_solid_metal_fact_sheet.pdf.
- Semi-solid_metal_casting wikiPageExternalLink Thixo-Schmieden.mpg.
- Semi-solid_metal_casting wikiPageExternalLink semi_solid_metal_fact_sheet.pdf.
- Semi-solid_metal_casting wikiPageID "13233319".
- Semi-solid_metal_casting wikiPageRevisionID "603614398".
- Semi-solid_metal_casting hasPhotoCollection Semi-solid_metal_casting.
- Semi-solid_metal_casting subject Category:Casting_(manufacturing).
- Semi-solid_metal_casting subject Category:Metalworking.
- Semi-solid_metal_casting comment "Semi-solid metal casting (SSM) is a near net shape variant of die casting. The process is used with non-ferrous metals, such as aluminium, copper, and magnesium. The process combines the advantages of casting and forging. The process is named after the fluid property thixotropy, which is the phenomenon that allows this process to work. Simply, thixotropic fluids shear when the material flows, but thicken when standing.".
- Semi-solid_metal_casting label "Semi-solid metal casting".
- Semi-solid_metal_casting label "Thixoforming".
- Semi-solid_metal_casting label "Tiksoformowanie".
- Semi-solid_metal_casting sameAs Thixoforming.
- Semi-solid_metal_casting sameAs Tiksoformowanie.
- Semi-solid_metal_casting sameAs m.03bzpg2.
- Semi-solid_metal_casting sameAs Q1930939.
- Semi-solid_metal_casting sameAs Q1930939.
- Semi-solid_metal_casting wasDerivedFrom Semi-solid_metal_casting?oldid=603614398.
- Semi-solid_metal_casting isPrimaryTopicOf Semi-solid_metal_casting.