Matches in DBpedia 2014 for { <http://dbpedia.org/resource/VoluMill> ?p ?o. }
Showing items 1 to 40 of
40
with 100 items per page.
- VoluMill abstract "VoluMill is Computer Aided Manufacturing software developed by Celeritive Technologies that produces an ultra high performance toolpath designed for High Speed Machining applications. These applications include all 2-axis and 3-axis rough milling tasks, from simple prismatic parts to complex freeform molds. VoluMill is offered as a standalone version called VoluMill Universal, which is designed to work with any CAM system, and also as integrated versions that run inside hyperMILL, GibbsCAM, BobCAD-CAM, SigmaNEST, Mastercam, and NX (Unigraphics).VoluMill was created to address the four problem areas of traditional toolpaths: The initial full cut into the material Stepping over between cuts Feeding into new areas of the part Overloading in cornersIn addition, VoluMill makes dynamic adjustments to the axial depth of cut and/or the feed rate so as to never exceed a pre-set rate of material removal. As a result, VoluMill can be safely used at feeds and speeds many times greater than what is recommended by cutter manufacturers. In addition to achieving much higher material removal rates than typical machining, VoluMill has also been shown to double, treble, or even quadruple Milling cutter life when used correctly.In contrast with other types of High Speed Machining toolpaths, VoluMill toolpaths are typically run at axial depths of cut up to the full flute length of the Milling cutter. But they are also effective in high speed shallow-axial, deep-radial cutting; a stepover between passes of up to 100% of the flat of the tool can be safely used without leaving any uncut material.VoluMill is not trochoidal milling, and it does not control the cutting tool engagement angle. Instead, it designs its path so that these techniques, which can dramatically increase the overall path length, are not necessary in the first place.".
- VoluMill developer Celeritive.
- VoluMill genre Computer-aided_manufacturing.
- VoluMill license Proprietary_software.
- VoluMill wikiPageExternalLink sp-feature1.aspx.
- VoluMill wikiPageExternalLink www.volumill.com.
- VoluMill wikiPageID "26545965".
- VoluMill wikiPageRevisionID "577783925".
- VoluMill caption "A 3-axis high speed roughing toolpath shown in VoluMill Universal".
- VoluMill developer Celeritive.
- VoluMill genre "CAM High Speed Machining / Ultra High Performance Toolpath".
- VoluMill hasPhotoCollection VoluMill.
- VoluMill license Proprietary_software.
- VoluMill name "VoluMill".
- VoluMill operatingSystem Microsoft_Windows.
- VoluMill screenshot "250".
- VoluMill website www.volumill.com.
- VoluMill subject Category:Computer-aided_manufacturing_software.
- VoluMill type Abstraction100002137.
- VoluMill type Code106355894.
- VoluMill type CodingSystem106353757.
- VoluMill type Communication100033020.
- VoluMill type Software106566077.
- VoluMill type Writing106359877.
- VoluMill type WrittenCommunication106349220.
- VoluMill type Software.
- VoluMill type Work.
- VoluMill type CreativeWork.
- VoluMill type InformationEntity.
- VoluMill comment "VoluMill is Computer Aided Manufacturing software developed by Celeritive Technologies that produces an ultra high performance toolpath designed for High Speed Machining applications. These applications include all 2-axis and 3-axis rough milling tasks, from simple prismatic parts to complex freeform molds.".
- VoluMill label "VoluMill".
- VoluMill sameAs VoluMill.
- VoluMill sameAs m.0bh7311.
- VoluMill sameAs Q7940817.
- VoluMill sameAs Q7940817.
- VoluMill sameAs VoluMill.
- VoluMill wasDerivedFrom VoluMill?oldid=577783925.
- VoluMill homepage www.volumill.com.
- VoluMill isPrimaryTopicOf VoluMill.
- VoluMill name "VoluMill".