Matches in LOV for { <http://def.seegrid.csiro.au/isotc211/iso19156/2011/observation#resultTime> ?p ?o. }
Showing items 1 to 7 of
7
with 100 items per page.
- resultTime type ObjectProperty.
- resultTime comment "time at which the result became available, after all processing steps were completed".
- resultTime domain AnyFeature.
- resultTime isDefinedBy observation.
- resultTime label "result time".
- resultTime range Instant.
- resultTime definition "The attribute resultTime:TM_Instant shall describe the time when the result became available, typically when the procedure (7.2.2.10) associated with the observation was completed. For some observations, this is identical to the phenomenonTime. However, there are important cases where they differ.\n\nEXAMPLE 1 Where a measurement is made on a specimen in a laboratory, the phenomenonTime is the time the specimen was retrieved from its host, while the resultTime is the time the laboratory procedure was applied.\n\nEXAMPLE 2 The resultTime also supports disambiguation of repeat measurements made of the same property of a feature using the same procedure.\n\nEXAMPLE 3 Where sensor observation results are post-processed, the resultTime is the post-processing time, while the phenomenonTime is the time of initial interaction with the world.\n\nEXAMPLE 4 Simulations can estimate the values for phenomena in the future or past. The phenomenonTime is the time that the result applies to, while the resultTime is the time that the simulation was executed.".