Matches in UGent Biblio for { <https://biblio.ugent.be/publication/361064#aggregation> ?p ?o. }
Showing items 1 to 31 of
31
with 100 items per page.
- aggregation classification "A1".
- aggregation creator B353087.
- aggregation creator B353088.
- aggregation creator person.
- aggregation creator person.
- aggregation date "1997".
- aggregation hasFormat 361064.bibtex.
- aggregation hasFormat 361064.csv.
- aggregation hasFormat 361064.dc.
- aggregation hasFormat 361064.didl.
- aggregation hasFormat 361064.doc.
- aggregation hasFormat 361064.json.
- aggregation hasFormat 361064.mets.
- aggregation hasFormat 361064.mods.
- aggregation hasFormat 361064.rdf.
- aggregation hasFormat 361064.ris.
- aggregation hasFormat 361064.txt.
- aggregation hasFormat 361064.xls.
- aggregation hasFormat 361064.yaml.
- aggregation isPartOf urn:issn:0951-3248.
- aggregation language "eng".
- aggregation publisher "IOP PUBLISHING LTD".
- aggregation subject "Science General".
- aggregation title "Development of high power magnetron sputtering targets prepared by flame spraying".
- aggregation abstract "To achieve a cost effective process for the deposition of YBCO thin films using magnetron sputtering, it is imperative to reach the highest deposition rate possible. This study describes the development of high power YBCO targets by flame spraying. The YBCO was doped with Ag to increase the electrical and thermal conductivity. The spray drying technique was used for the preparation of dedicated powder material, containing the appropriate amounts of Y, Ba, Cu and Ag. Thermal analysis, SEM and XRD were used to analyse phase composition and thermal and electrical characteristics were compared for different amounts of Ag added. The optimal particle size and distribution for flame spraying were obtained using spray drying by adjusting the spray parameters, the concentration and composition of the sprayed solutions and slurries and the spraying parameters. Test samples were made by flame spraying spray dried CuO and YBCO powder with a particle size of 40-60 micron onto a stainless steel substrate.".
- aggregation authorList BK650866.
- aggregation endPage "144".
- aggregation issue "158".
- aggregation startPage "141".
- aggregation isDescribedBy 361064.
- aggregation similarTo LU-361064.