Matches in DBpedia 2014 for { <http://dbpedia.org/resource/.475_Linebaugh> ?p ?o. }
Showing items 1 to 41 of
41
with 100 items per page.
- .475_Linebaugh abstract "The .475 Linebaugh is an extremely potent rimmed revolver cartridge developed by John Linebaugh in the late 1980s. The cartridge is based on the .45-70 Government case cut down to 1.5 inches and loaded with .475-inch-diameter (12.1 mm) bullets weighing from 320 grains (21 g) to 440 grains (29 g). Although the .45 Silhouette cartridge is also derived from a .45-70 trimmed down to 1.5 inches, the .475 Linebaugh saw the same case modified to accept .475 caliber bullets, resulting in significantly different ballistic performance.The then-new .475 Linebaugh was first announced in the May 1988 issue of Guns & Ammo in an article written by Ross Seyfried.".
- .475_Linebaugh thumbnail 475_Linebaugh_and_480_Ruger_cartridges.jpg?width=300.
- .475_Linebaugh wikiPageExternalLink 475Linebaugh.htm.
- .475_Linebaugh wikiPageExternalLink w475lineb.html.
- .475_Linebaugh wikiPageID "1062265".
- .475_Linebaugh wikiPageRevisionID "531326942".
- .475_Linebaugh balsrc ""Cartridges of the World"".
- .475_Linebaugh base "0.504".
- .475_Linebaugh btype "SP".
- .475_Linebaugh bullet "0.475".
- .475_Linebaugh bw "370".
- .475_Linebaugh bw "440".
- .475_Linebaugh caption "A .480 Ruger and a .475 Linebaugh cartridge".
- .475_Linebaugh caseLength "1.4".
- .475_Linebaugh caseType "Semi-rimmed, straight".
- .475_Linebaugh designDate "1988".
- .475_Linebaugh designer "Linebaugh, John".
- .475_Linebaugh en "1800".
- .475_Linebaugh en "1840".
- .475_Linebaugh hasPhotoCollection .475_Linebaugh.
- .475_Linebaugh length "1.77".
- .475_Linebaugh name "0.475".
- .475_Linebaugh neck "0.504".
- .475_Linebaugh origin "USA".
- .475_Linebaugh parent "0.45".
- .475_Linebaugh primer "Large pistol".
- .475_Linebaugh rimDia "0.54".
- .475_Linebaugh rimThick "0.065".
- .475_Linebaugh testBarrelLength "5.5".
- .475_Linebaugh type "Handgun".
- .475_Linebaugh vel "1360".
- .475_Linebaugh vel "1495".
- .475_Linebaugh subject Category:Pistol_and_rifle_cartridges.
- .475_Linebaugh comment "The .475 Linebaugh is an extremely potent rimmed revolver cartridge developed by John Linebaugh in the late 1980s. The cartridge is based on the .45-70 Government case cut down to 1.5 inches and loaded with .475-inch-diameter (12.1 mm) bullets weighing from 320 grains (21 g) to 440 grains (29 g).".
- .475_Linebaugh label ".475 Linebaugh".
- .475_Linebaugh sameAs m.0c007jf.
- .475_Linebaugh sameAs Q4545375.
- .475_Linebaugh sameAs Q4545375.
- .475_Linebaugh wasDerivedFrom .475_Linebaugh?oldid=531326942.
- .475_Linebaugh depiction 475_Linebaugh_and_480_Ruger_cartridges.jpg.
- .475_Linebaugh isPrimaryTopicOf .475_Linebaugh.