Matches in DBpedia 2014 for { <http://dbpedia.org/resource/2008_Lenox_Industrial_Tools_301> ?p ?o. }
Showing items 1 to 42 of
42
with 100 items per page.
- 2008_Lenox_Industrial_Tools_301 abstract "The 2008 Lenox Industrial Tools 301 was the seventeenth race of the 2008 NASCAR Sprint Cup season, and was run on June 29 of that year at New Hampshire Motor Speedway, located in Loudon, New Hampshire. This was the first race under the new ownership of Speedway Motorsports, Inc. after purchasing the track from Bob Bahre in the autumn of 2007.Televised coverage was handled by TNT starting at 12:30 PM US EDT, and radio being handled in their swan song at this facility by MRN starting at 1:15 PM US EDT and simulcast via Sirius Satellite Radio. Starting with the fall race, SMI-owned Performance Racing Network will carry the events at this track, as this was a result of a compromise on who had radio rights for the 2008 events (save for the NASCAR Craftsman Truck Series race in September, as MRN holds all rights to that series.) This race also was planned to be the first year of an additional lap on the 1.058 miles (1.703 km) track, as suggested by race sponsor Lenox Industrial Tools that says that their employees "go the extra mile" for their customers. However, due to a severe thunderstorm that bore down on the region, the race was stopped with seventeen laps to go.".
- 2008_Lenox_Industrial_Tools_301 wikiPageID "17894915".
- 2008_Lenox_Industrial_Tools_301 wikiPageRevisionID "561868263".
- 2008_Lenox_Industrial_Tools_301 announcers "Bill Weber, Wally Dallenbach, Jr. and Kyle Petty".
- 2008_Lenox_Industrial_Tools_301 car "2".
- 2008_Lenox_Industrial_Tools_301 country "United States".
- 2008_Lenox_Industrial_Tools_301 courseKm "1.703".
- 2008_Lenox_Industrial_Tools_301 courseMi "1.058".
- 2008_Lenox_Industrial_Tools_301 distanceKm "483.562".
- 2008_Lenox_Industrial_Tools_301 distanceLaps "284".
- 2008_Lenox_Industrial_Tools_301 distanceMi "300.472".
- 2008_Lenox_Industrial_Tools_301 firstDriver Kurt_Busch.
- 2008_Lenox_Industrial_Tools_301 firstTeam Team_Penske.
- 2008_Lenox_Industrial_Tools_301 fulldate "2008-06-29".
- 2008_Lenox_Industrial_Tools_301 hasPhotoCollection 2008_Lenox_Industrial_Tools_301.
- 2008_Lenox_Industrial_Tools_301 location "New Hampshire Motor Speedway in Loudon, New Hampshire.".
- 2008_Lenox_Industrial_Tools_301 mostDriver Tony_Stewart.
- 2008_Lenox_Industrial_Tools_301 mostLaps "132".
- 2008_Lenox_Industrial_Tools_301 mostTeam Joe_Gibbs_Racing.
- 2008_Lenox_Industrial_Tools_301 network TNT_(TV_channel).
- 2008_Lenox_Industrial_Tools_301 officialName "Lenox Industrial Tools 301".
- 2008_Lenox_Industrial_Tools_301 poleDriver Patrick_Carpentier.
- 2008_Lenox_Industrial_Tools_301 poleTeam Richard_Petty_Motorsports.
- 2008_Lenox_Industrial_Tools_301 poleTime "29.349".
- 2008_Lenox_Industrial_Tools_301 raceName "Lenox Industrial Tools 301".
- 2008_Lenox_Industrial_Tools_301 raceNo "17".
- 2008_Lenox_Industrial_Tools_301 scheduledKm "512.508".
- 2008_Lenox_Industrial_Tools_301 scheduledLaps "301".
- 2008_Lenox_Industrial_Tools_301 scheduledMi "318.458".
- 2008_Lenox_Industrial_Tools_301 seasonNo "36".
- 2008_Lenox_Industrial_Tools_301 type "NAS".
- 2008_Lenox_Industrial_Tools_301 year "2008".
- 2008_Lenox_Industrial_Tools_301 subject Category:2008_NASCAR_Sprint_Cup_Series.
- 2008_Lenox_Industrial_Tools_301 subject Category:2008_in_New_Hampshire.
- 2008_Lenox_Industrial_Tools_301 subject Category:NASCAR_races_at_New_Hampshire_Motor_Speedway.
- 2008_Lenox_Industrial_Tools_301 comment "The 2008 Lenox Industrial Tools 301 was the seventeenth race of the 2008 NASCAR Sprint Cup season, and was run on June 29 of that year at New Hampshire Motor Speedway, located in Loudon, New Hampshire. This was the first race under the new ownership of Speedway Motorsports, Inc.".
- 2008_Lenox_Industrial_Tools_301 label "2008 Lenox Industrial Tools 301".
- 2008_Lenox_Industrial_Tools_301 sameAs m.047r395.
- 2008_Lenox_Industrial_Tools_301 sameAs Q4611422.
- 2008_Lenox_Industrial_Tools_301 sameAs Q4611422.
- 2008_Lenox_Industrial_Tools_301 wasDerivedFrom 2008_Lenox_Industrial_Tools_301?oldid=561868263.
- 2008_Lenox_Industrial_Tools_301 isPrimaryTopicOf 2008_Lenox_Industrial_Tools_301.