Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Anodic_protection> ?p ?o. }
Showing items 1 to 21 of
21
with 100 items per page.
- Anodic_protection abstract "Anodic protection (AP) is a technique to control the corrosion of a metal surface by making it the anode of an electrochemical cell and controlling the electrode potential in a zone where the metal is passive.AP is used to protect metals that exhibit passivation in environments whereby the current density in the freely corroding state is significantly higher than the current density in the passive state over a wide range of potentials.Anodic protection is used for carbon steel storage tanks containing extreme pH environments including concentrated sulfuric acid and 50 percent caustic soda where cathodic protection is not suitable due to very high current requirements.An anodic protection system includes an external power supply connected to auxiliary cathodes and controlled by a feedback signal from one or more reference electrodes. Careful design and control is required when using anodic protection for several reasons, including excessive current when passivation is lost or unstable, leading to possible accelerated corrosion.".
- Anodic_protection wikiPageID "26095678".
- Anodic_protection wikiPageRevisionID "561759291".
- Anodic_protection hasPhotoCollection Anodic_protection.
- Anodic_protection subject Category:Chemical_processes.
- Anodic_protection subject Category:Corrosion_prevention.
- Anodic_protection type ChemicalProcess113446390.
- Anodic_protection type ChemicalProcesses.
- Anodic_protection type NaturalProcess113518963.
- Anodic_protection type PhysicalEntity100001930.
- Anodic_protection type Process100029677.
- Anodic_protection comment "Anodic protection (AP) is a technique to control the corrosion of a metal surface by making it the anode of an electrochemical cell and controlling the electrode potential in a zone where the metal is passive.AP is used to protect metals that exhibit passivation in environments whereby the current density in the freely corroding state is significantly higher than the current density in the passive state over a wide range of potentials.Anodic protection is used for carbon steel storage tanks containing extreme pH environments including concentrated sulfuric acid and 50 percent caustic soda where cathodic protection is not suitable due to very high current requirements.An anodic protection system includes an external power supply connected to auxiliary cathodes and controlled by a feedback signal from one or more reference electrodes. ".
- Anodic_protection label "Anodic protection".
- Anodic_protection label "Ochrona anodowa".
- Anodic_protection sameAs Ochrona_anodowa.
- Anodic_protection sameAs m.0cn_tph.
- Anodic_protection sameAs Q4769847.
- Anodic_protection sameAs Q4769847.
- Anodic_protection sameAs Anodic_protection.
- Anodic_protection wasDerivedFrom Anodic_protection?oldid=561759291.
- Anodic_protection isPrimaryTopicOf Anodic_protection.