Matches in DBpedia 2014 for { <http://dbpedia.org/resource/British_Standard_Cycle> ?p ?o. }
Showing items 1 to 30 of
30
with 100 items per page.
- British_Standard_Cycle abstract "British Standard Cycle (BSC) or (BSCy) is a British Imperial screw thread standard. Unlike other major British imperial thread standards (British Standard Whitworth and British Standard Fine) the thread runs at a 60 degrees rather than a 55 degrees angle. It generally comes as 26 threads per inch (tpi) and is similar to 1 mm ISO threads which are equivalent of 25.4 threads per inch and also run at a 60 degrees angle. It was originally used with both bicycles and motorcycles. However it is now believed to be obsolete in motorcycle manufacture. In the bicycle industry it is still found on virtually all bottom bracket threads and the wheel axles of low-end models manufactured in China.[citation needed]Traditionally the parts it would be found on are: Front axle and seat pin 5/16th inch diameter (7.94 mm), 24 or 26 tpi threading Rear axle 3/8th inch diameter (9.53 mm), 26 tpi GB Stems using 5/16th inch diameter (7.94 mm), 26 tpi for the handlebar clampNote that M8 × 1.00 metric threaded parts can interchange with 5/16th × 24 tpi parts with a "Class B fit", meaning you should not go back and forth between threadings.British Bicycle standards for other parts which are not strictly BSC but come in similar fine fines include: Bottom Bracket cups diameter with a 24 tpi ISO standard or a 26 tpi Raleigh (now obsolete) standard↑".
- British_Standard_Cycle wikiPageID "23103972".
- British_Standard_Cycle wikiPageRevisionID "599583812".
- British_Standard_Cycle hasPhotoCollection British_Standard_Cycle.
- British_Standard_Cycle subject Category:Mechanical_standards.
- British_Standard_Cycle subject Category:Screws.
- British_Standard_Cycle subject Category:Threading_(manufacturing).
- British_Standard_Cycle type CausalAgent100007347.
- British_Standard_Cycle type Defender109614684.
- British_Standard_Cycle type Keeper110229498.
- British_Standard_Cycle type Lawman110249459.
- British_Standard_Cycle type LivingThing100004258.
- British_Standard_Cycle type Object100002684.
- British_Standard_Cycle type Organism100004475.
- British_Standard_Cycle type Person100007846.
- British_Standard_Cycle type PhysicalEntity100001930.
- British_Standard_Cycle type Preserver110466918.
- British_Standard_Cycle type PrisonGuard110149867.
- British_Standard_Cycle type Screws.
- British_Standard_Cycle type Whole100003553.
- British_Standard_Cycle type YagoLegalActor.
- British_Standard_Cycle type YagoLegalActorGeo.
- British_Standard_Cycle comment "British Standard Cycle (BSC) or (BSCy) is a British Imperial screw thread standard. Unlike other major British imperial thread standards (British Standard Whitworth and British Standard Fine) the thread runs at a 60 degrees rather than a 55 degrees angle. It generally comes as 26 threads per inch (tpi) and is similar to 1 mm ISO threads which are equivalent of 25.4 threads per inch and also run at a 60 degrees angle. It was originally used with both bicycles and motorcycles.".
- British_Standard_Cycle label "British Standard Cycle".
- British_Standard_Cycle sameAs m.064kq5m.
- British_Standard_Cycle sameAs Q4971097.
- British_Standard_Cycle sameAs Q4971097.
- British_Standard_Cycle sameAs British_Standard_Cycle.
- British_Standard_Cycle wasDerivedFrom British_Standard_Cycle?oldid=599583812.
- British_Standard_Cycle isPrimaryTopicOf British_Standard_Cycle.