Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Cocking_handle> ?p ?o. }
Showing items 1 to 24 of
24
with 100 items per page.
- Cocking_handle abstract "The cocking handle (also known as charging handle or bolt handle) is a device on a firearm which, when operated, results in the hammer or striker being cocked or moved to the ready position. It allows the operator to pull the bolt to the rear, facilitating any number of the following: Ejecting a spent shell casing or unfired cartridge from the chamber. Loading a round from the magazine or by hand through the chamber. Clearing a stoppage such as a jam, double feed, stovepipe or misfire. Verification that the weapon's chamber is clear of any rounds or other obstructions. Moving the bolt in to battery, acting as a forward assist but not necessarily . Releasing a bolt locked to the rear, such as would be the case after firing the last round on a firearm equipped with a last-round-hold-open feature.These devices vary significantly between firearms but may occur in the form of a small protrusion or hook from the side of the bolt, a pumped slide or lever. The slide in a pistol performs similar actions as a cocking handle.There are also additional factors concerning the design of cocking handles, and some of them are especially important if the weapon is for tactical use. One issue is the mean time between failures due to metal fatigue. Just like other parts, cocking handles sometimes break when weapons are heavily used. Another issue is whether the cocking handle is sufficiently large for use by someone wearing heavy gloves and protective clothing. The FN F2000 is one of the weapons that has this latter feature. Some weapons are designed with thumb grooves for extra grip when cocking a weapon to prevent releasing it before it has been pulled back all the way, such as the British SA80 family of rifles.".
- Cocking_handle wikiPageID "8093328".
- Cocking_handle wikiPageRevisionID "566676417".
- Cocking_handle hasPhotoCollection Cocking_handle.
- Cocking_handle subject Category:Firearm_components.
- Cocking_handle type Abstraction100002137.
- Cocking_handle type Cognition100023271.
- Cocking_handle type Component105868954.
- Cocking_handle type Concept105835747.
- Cocking_handle type Content105809192.
- Cocking_handle type FirearmComponents.
- Cocking_handle type Idea105833840.
- Cocking_handle type Part105867413.
- Cocking_handle type PsychologicalFeature100023100.
- Cocking_handle comment "The cocking handle (also known as charging handle or bolt handle) is a device on a firearm which, when operated, results in the hammer or striker being cocked or moved to the ready position. It allows the operator to pull the bolt to the rear, facilitating any number of the following: Ejecting a spent shell casing or unfired cartridge from the chamber. Loading a round from the magazine or by hand through the chamber. Clearing a stoppage such as a jam, double feed, stovepipe or misfire.".
- Cocking_handle label "Cocking handle".
- Cocking_handle label "Maniglia d'armamento".
- Cocking_handle sameAs Maniglia_d'armamento.
- Cocking_handle sameAs m.026r60q.
- Cocking_handle sameAs Q5139614.
- Cocking_handle sameAs Q5139614.
- Cocking_handle sameAs Cocking_handle.
- Cocking_handle wasDerivedFrom Cocking_handle?oldid=566676417.
- Cocking_handle isPrimaryTopicOf Cocking_handle.