Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Datum_reference> ?p ?o. }
Showing items 1 to 13 of
13
with 100 items per page.
- Datum_reference abstract "Datum reference is a concept used in carpentry, metalworking, needlework, Geometric dimensioning and tolerancing (GD&T) and similar activities.In carpentry, an alternative, more common name is "face side" and "face edge". The artisan nominates two straight edges on a workpiece as the "datum edges", and they are marked accordingly. One convention is to mark the first datum edge with a single slanted line (/) and the second with double lines (//). For most work, the datum references of the workpiece need to be square. If necessary they may be cut, planed or filed to make them so. In subsequent marking out, all measurements are then taken from either of the two datum references.".
- Datum_reference wikiPageID "1013923".
- Datum_reference wikiPageRevisionID "596725064".
- Datum_reference hasPhotoCollection Datum_reference.
- Datum_reference subject Category:Woodworking.
- Datum_reference comment "Datum reference is a concept used in carpentry, metalworking, needlework, Geometric dimensioning and tolerancing (GD&T) and similar activities.In carpentry, an alternative, more common name is "face side" and "face edge". The artisan nominates two straight edges on a workpiece as the "datum edges", and they are marked accordingly. One convention is to mark the first datum edge with a single slanted line (/) and the second with double lines (//).".
- Datum_reference label "Datum reference".
- Datum_reference label "База (машиностроение)".
- Datum_reference sameAs m.03z85j.
- Datum_reference sameAs Q1047519.
- Datum_reference sameAs Q1047519.
- Datum_reference wasDerivedFrom Datum_reference?oldid=596725064.
- Datum_reference isPrimaryTopicOf Datum_reference.