Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Duplex_worm> ?p ?o. }
Showing items 1 to 30 of
30
with 100 items per page.
- Duplex_worm abstract "Contrary to standard toothing of worm gear sets, the two flanks of duplex or dual lead worms and wheels are manufactured with slightly different modules and/or diameter quotients. As a result of this, different lead angles on both tooth profiles are obtained. With this the tooth thickness is continuously increasing all over the worm length, while the gap between two threads is decreasing. At the worm wheel, the different modules result in different addendum modification coefficients and rolling circle diameters at both flanks. Because of this the profiles are different at the front and at the rear flank. The thickness of each tooth and the tooth gaps remain constant at the circumference of the wheel. Backlash adjustment is done by shifting the worm axially, so that the section of the worm with the needed tooth thickness will be in contact with the wheel, giving the desired backlash (fig. 1). This way, backlash can be easily adjusted to any desired value when mounting the gear, and even worn gears can be readjusted at any time delicately and continuously, without modifying the tooth contact or creating meshing interference.".
- Duplex_worm thumbnail Duplex-Nachstellung.png?width=300.
- Duplex_worm wikiPageExternalLink DUPLEX-SD-AT-1991-english.pdf.
- Duplex_worm wikiPageID "12691300".
- Duplex_worm wikiPageRevisionID "544906518".
- Duplex_worm hasPhotoCollection Duplex_worm.
- Duplex_worm subject Category:Gears.
- Duplex_worm type Artifact100021939.
- Duplex_worm type Device103183080.
- Duplex_worm type Gear103430551.
- Duplex_worm type Gears.
- Duplex_worm type Instrumentality103575240.
- Duplex_worm type Machine103700963.
- Duplex_worm type MechanicalDevice103736970.
- Duplex_worm type Mechanism103738472.
- Duplex_worm type Object100002684.
- Duplex_worm type PhysicalEntity100001930.
- Duplex_worm type Wheel104574999.
- Duplex_worm type Whole100003553.
- Duplex_worm comment "Contrary to standard toothing of worm gear sets, the two flanks of duplex or dual lead worms and wheels are manufactured with slightly different modules and/or diameter quotients. As a result of this, different lead angles on both tooth profiles are obtained. With this the tooth thickness is continuously increasing all over the worm length, while the gap between two threads is decreasing.".
- Duplex_worm label "Duplex worm".
- Duplex_worm label "Duplex-Schnecke".
- Duplex_worm sameAs Duplex-Schnecke.
- Duplex_worm sameAs m.02x0mxp.
- Duplex_worm sameAs Q1266504.
- Duplex_worm sameAs Q1266504.
- Duplex_worm sameAs Duplex_worm.
- Duplex_worm wasDerivedFrom Duplex_worm?oldid=544906518.
- Duplex_worm depiction Duplex-Nachstellung.png.
- Duplex_worm isPrimaryTopicOf Duplex_worm.
