Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Engineering_fit> ?p ?o. }
Showing items 1 to 21 of
21
with 100 items per page.
- Engineering_fit abstract "Fit refers to the mating of two mechanical components. Manufactured parts are very frequently required to mate with one another. They may be designed to slide freely against one another or they may be designed to bind together to form a single unit. The most common fit found in the machine shop is that of a shaft in a hole.There are three general categories of fits: 1) Clearance fits for when it may be desirable for the shaft to rotate or slide freely within the hole, this is usually referred to as a "sliding fit." 2) Interference fits for when it is desirable for the shaft to be securely held within the hole, this is usually referred to as an interference fit and 3) Transition fits for when it is desirable that the shaft to be held securely, yet not so securely that it cannot be disassembled, this is usually referred to as a Location or Transition fit.Within each category of fit there are several classes ranging from high precision and narrow tolerance (allowance) to lower precision and wider tolerance. The choice of fit is dictated first by the use and secondly by the manufacturability of the parts.".
- Engineering_fit wikiPageID "17404454".
- Engineering_fit wikiPageRevisionID "596899933".
- Engineering_fit hasPhotoCollection Engineering_fit.
- Engineering_fit subject Category:Mechanical_engineering.
- Engineering_fit subject Category:Metalworking_terminology.
- Engineering_fit comment "Fit refers to the mating of two mechanical components. Manufactured parts are very frequently required to mate with one another. They may be designed to slide freely against one another or they may be designed to bind together to form a single unit.".
- Engineering_fit label "Ajustement (mécanique)".
- Engineering_fit label "Engineering fit".
- Engineering_fit label "Passung".
- Engineering_fit label "Tolerancja wymiaru".
- Engineering_fit label "Посадка (машиностроение)".
- Engineering_fit sameAs Lícování.
- Engineering_fit sameAs Passung.
- Engineering_fit sameAs Ajustement_(mécanique).
- Engineering_fit sameAs Tolerancja_wymiaru.
- Engineering_fit sameAs m.04g1sst.
- Engineering_fit sameAs Q2056181.
- Engineering_fit sameAs Q2056181.
- Engineering_fit wasDerivedFrom Engineering_fit?oldid=596899933.
- Engineering_fit isPrimaryTopicOf Engineering_fit.