Matches in DBpedia 2014 for { <http://dbpedia.org/resource/IDEAL_model> ?p ?o. }
Showing items 1 to 13 of
13
with 100 items per page.
- IDEAL_model abstract "IDEAL (Integrated Design, Evaluation, and Assessment of Loadings) is a post-construction water quality model for designing stormwater best management practices (BMP) (see Best management practice for water pollution) and calculating their effectiveness in removing common stormwater pollutants (sediments, bacteria, nitrogen and phosphorus). The model's runoff treatment algorithms are process-based by predicting runoff rates and pollutant loads and routing these loadings through BMPs using technologies which have been experimentally validated. Using isothermic relationships along with accepted decay, settling, and infiltration methods, pollutant trapping in BMPs are computed. The developers of IDEAL model are Dr. Bill Barfield (Regents Professor at Oklahoma State University, Woolpert Inc.) and Dr. John Hayes of Clemson University. Currently, six BMPs can be modeled with IDEAL: sand filters, wet and dry detention basin, bioswales, bioretention cells, and vegetated filter strips. The ability to model engineered devices has recently been developed, but requires trapping efficiency information to be input. Rainwater tanks/cisterns can also be modeled. Currently, hydraulic modeling of closed systems and open channels is simplistic.An recent article on the model was presented in Stormwater magazine. This articles explains the development of the model and its use in Greenville County as an effort to address NPDES stormwater permit conditions. Another similar article was presented at the 2003 EWRI annual conference.The U.S. Environmental Protection Agency (EPA) funded a Best Management Prcetice design manual developed in part by Dr. Barfield.".
- IDEAL_model wikiPageExternalLink www.stormopssoftware.com.
- IDEAL_model wikiPageID "15656142".
- IDEAL_model wikiPageRevisionID "591247705".
- IDEAL_model hasPhotoCollection IDEAL_model.
- IDEAL_model subject Category:Computer-aided_engineering_software.
- IDEAL_model comment "IDEAL (Integrated Design, Evaluation, and Assessment of Loadings) is a post-construction water quality model for designing stormwater best management practices (BMP) (see Best management practice for water pollution) and calculating their effectiveness in removing common stormwater pollutants (sediments, bacteria, nitrogen and phosphorus).".
- IDEAL_model label "IDEAL model".
- IDEAL_model sameAs m.03nntv4.
- IDEAL_model sameAs Q5969962.
- IDEAL_model sameAs Q5969962.
- IDEAL_model wasDerivedFrom IDEAL_model?oldid=591247705.
- IDEAL_model isPrimaryTopicOf IDEAL_model.