Matches in DBpedia 2014 for { <http://dbpedia.org/resource/MPI_MP8AC-3> ?p ?o. }
Showing items 1 to 47 of
47
with 100 items per page.
- MPI_MP8AC-3 abstract "The MPI MP8AC-3 is a light-weight Diesel locomotive built by the MotivePower division of Wabtec. It was designed from scratch as a work train engine for the New York City Subway system, where it is designated the R156. The MTA ordered 28 units in 2006. After some difficulty with the initial prototype, the first unit, numbered OL912, was delivered on May 1, 2012. Deliveries will continue through mid-2013.The R156 is designed to navigate the clearances and tight turns of the NYC subway, with weight constrained to 112,000 lbs so it can operate on elevated portions of the system. It joins a fleet of 62 Diesel-electric work locomotives on the system. Third rail power is not used because the third rail is normally turned off at work sites for safety reasons. Instead, the R156 is powered by a 6-cylinder, 800 horsepower Cummins QSK 23 Diesel engine. A separate, smaller John Deere Diesel drives a generator to provide auxiliary power, and to heat the main engine and keep batteries charged when the main engine is not running. Trucks are supplied by Kawasaki, which provides the same wheel and traction sets for new R160 subway cars. The traction motors are Siemens' SITRAC AC motors. The R156 locomotives have provisions for the future installation of communications-based train control (CBTC) equipment.".
- MPI_MP8AC-3 activeYearsEndYear "2013".
- MPI_MP8AC-3 activeYearsStartYear "2012".
- MPI_MP8AC-3 builder Wabtec.
- MPI_MP8AC-3 cylinderCount "6".
- MPI_MP8AC-3 numberBuilt "28".
- MPI_MP8AC-3 powerType Diesel-electric_transmission.
- MPI_MP8AC-3 thumbnail R156_locomotive_delivered_to_MTA.jpg?width=300.
- MPI_MP8AC-3 topSpeed "50.0".
- MPI_MP8AC-3 wikiPageID "35832895".
- MPI_MP8AC-3 wikiPageRevisionID "593661252".
- MPI_MP8AC-3 alt "The first R156 is delivered to the MTA".
- MPI_MP8AC-3 builddate "2012".
- MPI_MP8AC-3 builder Wabtec.
- MPI_MP8AC-3 caption "The first R156 is delivered to the MTA".
- MPI_MP8AC-3 cylindercount "6".
- MPI_MP8AC-3 deliverydate "2012".
- MPI_MP8AC-3 firstrundate "2012-05-01".
- MPI_MP8AC-3 fueltype Diesel_fuel.
- MPI_MP8AC-3 generator John_Deere.
- MPI_MP8AC-3 hasPhotoCollection MPI_MP8AC-3.
- MPI_MP8AC-3 name "MPI MP8AC-3".
- MPI_MP8AC-3 name "R156".
- MPI_MP8AC-3 numinclass "28".
- MPI_MP8AC-3 powertype Diesel-electric_transmission.
- MPI_MP8AC-3 primemover "Cummins QSK 23".
- MPI_MP8AC-3 railroad New_York_City_Subway.
- MPI_MP8AC-3 railroadclass "R156".
- MPI_MP8AC-3 totalproduction "28".
- MPI_MP8AC-3 tractionmotors "Siemens SITRAC AC propulsion".
- MPI_MP8AC-3 subject Category:Diesel_locomotives_of_the_United_States.
- MPI_MP8AC-3 subject Category:MPI_locomotives.
- MPI_MP8AC-3 subject Category:New_York_City_Subway.
- MPI_MP8AC-3 type Locomotive.
- MPI_MP8AC-3 type MeanOfTransportation.
- MPI_MP8AC-3 type Product.
- MPI_MP8AC-3 type DesignedArtifact.
- MPI_MP8AC-3 comment "The MPI MP8AC-3 is a light-weight Diesel locomotive built by the MotivePower division of Wabtec. It was designed from scratch as a work train engine for the New York City Subway system, where it is designated the R156. The MTA ordered 28 units in 2006. After some difficulty with the initial prototype, the first unit, numbered OL912, was delivered on May 1, 2012.".
- MPI_MP8AC-3 label "MPI MP8AC-3".
- MPI_MP8AC-3 sameAs m.0jwr8y_.
- MPI_MP8AC-3 sameAs Q6717296.
- MPI_MP8AC-3 sameAs Q6717296.
- MPI_MP8AC-3 wasDerivedFrom MPI_MP8AC-3?oldid=593661252.
- MPI_MP8AC-3 depiction R156_locomotive_delivered_to_MTA.jpg.
- MPI_MP8AC-3 isPrimaryTopicOf MPI_MP8AC-3.
- MPI_MP8AC-3 name "MPI MP8AC-3".
- MPI_MP8AC-3 name "R156 (New York City Subway)".
