Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Non-Intrusive_Stress_Measurement_System> ?p ?o. }
Showing items 1 to 26 of
26
with 100 items per page.
- Non-Intrusive_Stress_Measurement_System abstract "Non-Intrusive Stress Measurement (System) (NSMS) is a method for determining dynamic blade stresses in rotating turbomachinery. NSMS is also known by the names "Blade Tip Timing" (BTT), "Arrival Time Analysis" (ATA), "Blade Vibration Monitoring" (BVM) Beruehrungslose Schaufel Schwingungsmessung (BSSM), and "Blade Health Monitoring" (BHM). NSMS uses externally mounted sensors to determine the passing times of turbomachinery blades. The passing times after conversion to deflections, can be used to measure each blade’s vibratory response characteristics such as amplitude/stress, phase, frequency, and damping. Since every blade is measured, stage effects such as flutter, blade mistuning, and nodal diameter can also be characterized.The measurement method has been used successfully in all stages of the gas turbine engine (fan, compressor, and turbine) and on other turbo-machinery equipment ranging from turbo chargers to rocket pumps. The ability to apply the technology to a given situation is dependent upon a sensor type that can meet the environmental requirements.".
- Non-Intrusive_Stress_Measurement_System thumbnail Spot_Probe_Example,_Radial_View.png?width=300.
- Non-Intrusive_Stress_Measurement_System wikiPageID "34484142".
- Non-Intrusive_Stress_Measurement_System wikiPageRevisionID "601846042".
- Non-Intrusive_Stress_Measurement_System hasPhotoCollection Non-Intrusive_Stress_Measurement_System.
- Non-Intrusive_Stress_Measurement_System subject Category:Mechanical_tests.
- Non-Intrusive_Stress_Measurement_System type Abstraction100002137.
- Non-Intrusive_Stress_Measurement_System type Cognition100023271.
- Non-Intrusive_Stress_Measurement_System type Experiment105798043.
- Non-Intrusive_Stress_Measurement_System type HigherCognitiveProcess105770664.
- Non-Intrusive_Stress_Measurement_System type Inquiry105797597.
- Non-Intrusive_Stress_Measurement_System type MechanicalTests.
- Non-Intrusive_Stress_Measurement_System type ProblemSolving105796750.
- Non-Intrusive_Stress_Measurement_System type Process105701363.
- Non-Intrusive_Stress_Measurement_System type PsychologicalFeature100023100.
- Non-Intrusive_Stress_Measurement_System type Thinking105770926.
- Non-Intrusive_Stress_Measurement_System type Trial105799212.
- Non-Intrusive_Stress_Measurement_System comment "Non-Intrusive Stress Measurement (System) (NSMS) is a method for determining dynamic blade stresses in rotating turbomachinery. NSMS is also known by the names "Blade Tip Timing" (BTT), "Arrival Time Analysis" (ATA), "Blade Vibration Monitoring" (BVM) Beruehrungslose Schaufel Schwingungsmessung (BSSM), and "Blade Health Monitoring" (BHM). NSMS uses externally mounted sensors to determine the passing times of turbomachinery blades.".
- Non-Intrusive_Stress_Measurement_System label "Non-Intrusive Stress Measurement System".
- Non-Intrusive_Stress_Measurement_System sameAs m.0j24lsw.
- Non-Intrusive_Stress_Measurement_System sameAs Q7048770.
- Non-Intrusive_Stress_Measurement_System sameAs Q7048770.
- Non-Intrusive_Stress_Measurement_System sameAs Non-Intrusive_Stress_Measurement_System.
- Non-Intrusive_Stress_Measurement_System wasDerivedFrom Non-Intrusive_Stress_Measurement_System?oldid=601846042.
- Non-Intrusive_Stress_Measurement_System depiction Spot_Probe_Example,_Radial_View.png.
- Non-Intrusive_Stress_Measurement_System isPrimaryTopicOf Non-Intrusive_Stress_Measurement_System.
