Data Portal @ linkeddatafragments.org

Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Pre-unit_construction> ?p ?o. }

• Pre-unit_construction abstract "Pre-unit construction, also called separate construction, is a motorcycle engine architecture where the engine and gearbox are separate casings, with their own oil reservoirs, and usually attached to parallel plates that also attach to the frame. Even though Singer offered an integrated engine and gearbox in a single casing in 1911, it was not until the 1950s that technical advances meant it was possible to reliably construct engines with integral gearboxes in one unit, known as unit construction. Another variant is semi unit construction, where the gearbox is bolted directly to the engine. The term pre-unit is particularly applied to BSA and Triumph vertical twin motorcycles as a consequence of the strong publicity attached to their change to the unit construction of vertical twins in the early 1960s. Norton and Royal Enfield kept producing separate construction engine and gearbox motorcycles.The 1969 'Isolastic' frame Norton Commando had the engine, gearbox, and swingarm bolted together on plates bolted to the frame with shimmed rubber bushes. Among the Japanese manufacturers, Kawasaki produced a separate construction 650 cc vertical twin, inherited as a consequence of taking over Meguro in 1964,. The Meguro K models copied the BSA A7 and BSA A10 design, external appearance was similar although no parts are interchangeable.".
• Pre-unit_construction thumbnail BSA_Motorrad_4.JPG?width=300.
• Pre-unit_construction wikiPageID "7600278".
• Pre-unit_construction wikiPageRevisionID "568965565".
• Pre-unit_construction hasPhotoCollection Pre-unit_construction.
• Pre-unit_construction subject Category:Motorcycle_engines.
• Pre-unit_construction subject Category:Motorcycle_transmissions.
• Pre-unit_construction type Artifact100021939.
• Pre-unit_construction type Device103183080.
• Pre-unit_construction type Engine103287733.
• Pre-unit_construction type Instrumentality103575240.
• Pre-unit_construction type Machine103699975.
• Pre-unit_construction type Motor103789946.
• Pre-unit_construction type MotorcycleEngines.
• Pre-unit_construction type Object100002684.
• Pre-unit_construction type PhysicalEntity100001930.
• Pre-unit_construction type Whole100003553.
• Pre-unit_construction comment "Pre-unit construction, also called separate construction, is a motorcycle engine architecture where the engine and gearbox are separate casings, with their own oil reservoirs, and usually attached to parallel plates that also attach to the frame.".
• Pre-unit_construction label "Pre-unit construction".
• Pre-unit_construction label "分離式ギアボックス".
• Pre-unit_construction sameAs 分離式ギアボックス.
• Pre-unit_construction sameAs m.0266dr8.
• Pre-unit_construction sameAs Q7239274.
• Pre-unit_construction sameAs Q7239274.
• Pre-unit_construction sameAs Pre-unit_construction.
• Pre-unit_construction wasDerivedFrom Pre-unit_construction?oldid=568965565.
• Pre-unit_construction depiction BSA_Motorrad_4.JPG.
• Pre-unit_construction isPrimaryTopicOf Pre-unit_construction.