Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Process_control_network> ?p ?o. }
Showing items 1 to 19 of
19
with 100 items per page.
- Process_control_network abstract "A Process Control Network (PCN) is a communications network that is used to transmit instructions and data between control and measurement units and Supervisory Control and Data Acquisition (SCADA) equipment.These networks have, over the years, used many of the technologies and topologies utilised in other network applications. However, Process Control Networks (PCNs)have several special requirements that must be met in order for the solution to be acceptable to the industry. These requirements are, in no particular order: Robustness, Determinacy, Compatibility. Robustness includes requirements such as connection redundancy, reduced sensitivity to Electromagnetic Interference (EMI), and good error checking and correction. Determinacy involves assuring that each device is guaranteed access to the network, and in many cases mechanisms to allow priority information (such as alarms) through the system. Compatibility allows SCADA and Distributed Control Systems (DCS) from various manufacturers to communicate with control and measurement equipment from others.Many early PCNs were serial based, using low level standards such as EIA RS-422 and EIA RS-485 with proprietary protocols on top. One of the de facto standards (which is now becoming an open standard) is Modbus, originally from Modicon. Many PCNs used token ring token passing based protocols because they are essentially deterministic. Both Allen Bradley and Eurotherm utilised such mechanisms. Many of the measurement and control unit manufacturers signed up to the Fieldbus consortium but rather than one standard emerging each manufacturer promoted their own 'standard' leading to a myriad, and confusing, range of physical and logical systems.".
- Process_control_network wikiPageID "1067463".
- Process_control_network wikiPageRevisionID "601673902".
- Process_control_network hasPhotoCollection Process_control_network.
- Process_control_network subject Category:Networks.
- Process_control_network type Abstraction100002137.
- Process_control_network type Group100031264.
- Process_control_network type Network108434259.
- Process_control_network type Networks.
- Process_control_network type System108435388.
- Process_control_network comment "A Process Control Network (PCN) is a communications network that is used to transmit instructions and data between control and measurement units and Supervisory Control and Data Acquisition (SCADA) equipment.These networks have, over the years, used many of the technologies and topologies utilised in other network applications. However, Process Control Networks (PCNs)have several special requirements that must be met in order for the solution to be acceptable to the industry.".
- Process_control_network label "Process control network".
- Process_control_network label "شبكة تحكم في العمليات".
- Process_control_network sameAs m.0432tf.
- Process_control_network sameAs Q7247265.
- Process_control_network sameAs Q7247265.
- Process_control_network sameAs Process_control_network.
- Process_control_network wasDerivedFrom Process_control_network?oldid=601673902.
- Process_control_network isPrimaryTopicOf Process_control_network.