Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Rake_angle> ?p ?o. }
Showing items 1 to 26 of
26
with 100 items per page.
- Rake_angle abstract "Rake angle is a parameter used in various cutting and machining processes, describing the angle of the cutting face relative to the work. There are two rake angles, namely the back rake angle and side rake angle, both of which help to guide chip flow. There are three types of rake angles: positive, negative, and zero. Generally, positive rake angles: Make the tool more sharp and pointed. This reduces the strength of the tool, as the small included angle in the tip may cause it to chip away. Reduce cutting forces and power requirements. Helps in the formation of continuous chips in ductile materials. Can help avoid the formation of a built-up edge.Negative rake angles, by contrast: Make the tool more blunt, increasing the strength of the cutting edge. Increase the cutting forces. Can increase friction, resulting in higher temperatures. Can improve surface finish.A zero rake angle is the easiest to manufacture, but has a larger crater wear when compared to positive rake angle as the chip slides over the rake face.Recommended rake angles can vary depending on the material being cut, tool material, depth of cut, cutting speed, machine, and setup. This table summarizes recommended rake angles for single-point turning on a lathe; rake angles for drilling, milling, or sawing are often different.".
- Rake_angle thumbnail Metal_Cut_diag.svg?width=300.
- Rake_angle wikiPageID "25924075".
- Rake_angle wikiPageRevisionID "598096654".
- Rake_angle hasPhotoCollection Rake_angle.
- Rake_angle subject Category:Cutting_tools.
- Rake_angle subject Category:Metalworking_terminology.
- Rake_angle type Artifact100021939.
- Rake_angle type Cutter103154073.
- Rake_angle type CuttingImplement103154446.
- Rake_angle type CuttingTools.
- Rake_angle type Implement103563967.
- Rake_angle type Instrumentality103575240.
- Rake_angle type Object100002684.
- Rake_angle type PhysicalEntity100001930.
- Rake_angle type Tool104451818.
- Rake_angle type Whole100003553.
- Rake_angle comment "Rake angle is a parameter used in various cutting and machining processes, describing the angle of the cutting face relative to the work. There are two rake angles, namely the back rake angle and side rake angle, both of which help to guide chip flow. There are three types of rake angles: positive, negative, and zero. Generally, positive rake angles: Make the tool more sharp and pointed. This reduces the strength of the tool, as the small included angle in the tip may cause it to chip away.".
- Rake_angle label "Rake angle".
- Rake_angle sameAs m.0b6fq7v.
- Rake_angle sameAs Q7286564.
- Rake_angle sameAs Q7286564.
- Rake_angle sameAs Rake_angle.
- Rake_angle wasDerivedFrom Rake_angle?oldid=598096654.
- Rake_angle depiction Metal_Cut_diag.svg.
- Rake_angle isPrimaryTopicOf Rake_angle.
