Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Reduced_gradient_bubble_model> ?p ?o. }
Showing items 1 to 27 of
27
with 100 items per page.
- Reduced_gradient_bubble_model abstract "The reduced gradient bubble model (RGBM) is an algorithm developed by Dr Bruce Wienke for calculating decompression stops needed for a particular dive profile. It is related to the Varying Permeability Model. but is conceptually beyond that early model.It is used in several dive computers, particularly those made by Suunto, Mares, HydroSpace Engineering, and Underwater Technologies Center. It is characterised by the following assumptions: blood flow (perfusion) provides a limit for tissue gas penetration by diffusion; an exponential distribution of sizes of bubble seeds is always present, with many more small seeds than large ones; bubbles are permeable to gas transfer across surface boundaries under all pressures; the haldanean tissue compartments range in half time from 1 to 720 minutes, depending on gas mixture.Manufacturers such as Suunto have also devised approximations of Wienke's model. Suunto uses a modified haldanean nine-compartment model with the assumption of reduced off-gassing caused by bubbles. This implementation offers both a depth ceiling and a depth floor for the decompression stops. The former maximises tissue off-gassing and the latter minimises bubble growth. The model has been correlated and validatedIn a number of published articles using collected dive profile data.".
- Reduced_gradient_bubble_model wikiPageExternalLink deeprgbm.html.
- Reduced_gradient_bubble_model wikiPageExternalLink rgbm.html.
- Reduced_gradient_bubble_model wikiPageID "3510328".
- Reduced_gradient_bubble_model wikiPageRevisionID "578712379".
- Reduced_gradient_bubble_model hasPhotoCollection Reduced_gradient_bubble_model.
- Reduced_gradient_bubble_model subject Category:Decompression_algorithms.
- Reduced_gradient_bubble_model type Abstraction100002137.
- Reduced_gradient_bubble_model type Act100030358.
- Reduced_gradient_bubble_model type Activity100407535.
- Reduced_gradient_bubble_model type Algorithm105847438.
- Reduced_gradient_bubble_model type DecompressionAlgorithms.
- Reduced_gradient_bubble_model type Event100029378.
- Reduced_gradient_bubble_model type Procedure101023820.
- Reduced_gradient_bubble_model type PsychologicalFeature100023100.
- Reduced_gradient_bubble_model type Rule105846932.
- Reduced_gradient_bubble_model type YagoPermanentlyLocatedEntity.
- Reduced_gradient_bubble_model comment "The reduced gradient bubble model (RGBM) is an algorithm developed by Dr Bruce Wienke for calculating decompression stops needed for a particular dive profile. It is related to the Varying Permeability Model. but is conceptually beyond that early model.It is used in several dive computers, particularly those made by Suunto, Mares, HydroSpace Engineering, and Underwater Technologies Center.".
- Reduced_gradient_bubble_model label "Reduced Gradient Bubble Model".
- Reduced_gradient_bubble_model label "Reduced gradient bubble model".
- Reduced_gradient_bubble_model sameAs Reduced_Gradient_Bubble_Model.
- Reduced_gradient_bubble_model sameAs m.09hgk9.
- Reduced_gradient_bubble_model sameAs Q3931551.
- Reduced_gradient_bubble_model sameAs Q3931551.
- Reduced_gradient_bubble_model sameAs Reduced_gradient_bubble_model.
- Reduced_gradient_bubble_model wasDerivedFrom Reduced_gradient_bubble_model?oldid=578712379.
- Reduced_gradient_bubble_model isPrimaryTopicOf Reduced_gradient_bubble_model.