Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Return_loss> ?p ?o. }
Showing items 1 to 37 of
37
with 100 items per page.
- Return_loss abstract "In telecommunications, return loss is the loss of signal power resulting from the reflection caused at a discontinuity in a transmission line or optical fiber. This discontinuity can be a mismatch with the terminating load or with a device inserted in the line. It is usually expressed as a ratio in decibels (dB);where RL(dB) is the return loss in dB, Pi is the incident power and Pr is the reflected power.Return loss is related to both standing wave ratio (SWR) and reflection coefficient (Γ). Increasing return loss corresponds to lower SWR. Return loss is a measure of how well devices or lines are matched. A match is good if the return loss is high. A high return loss is desirable and results in a lower insertion loss.Return loss is used in modern practice in preference to SWR because it has better resolution for small values of reflected wave.".
- Return_loss wikiPageExternalLink anote044-ang.pdf.
- Return_loss wikiPageID "41665".
- Return_loss wikiPageRevisionID "603690874".
- Return_loss hasPhotoCollection Return_loss.
- Return_loss subject Category:Electrical_parameters.
- Return_loss subject Category:Engineering_ratios.
- Return_loss subject Category:Fiber_optics.
- Return_loss subject Category:Radio_electronics.
- Return_loss subject Category:Wave_mechanics.
- Return_loss type Abstraction100002137.
- Return_loss type Cognition100023271.
- Return_loss type Concept105835747.
- Return_loss type Constant105858936.
- Return_loss type Content105809192.
- Return_loss type ElectricalParameters.
- Return_loss type EngineeringRatios.
- Return_loss type Idea105833840.
- Return_loss type MagnitudeRelation113815152.
- Return_loss type Parameter105859071.
- Return_loss type PsychologicalFeature100023100.
- Return_loss type Quantity105855125.
- Return_loss type Ratio113819207.
- Return_loss type Relation100031921.
- Return_loss comment "In telecommunications, return loss is the loss of signal power resulting from the reflection caused at a discontinuity in a transmission line or optical fiber. This discontinuity can be a mismatch with the terminating load or with a device inserted in the line. It is usually expressed as a ratio in decibels (dB);where RL(dB) is the return loss in dB, Pi is the incident power and Pr is the reflected power.Return loss is related to both standing wave ratio (SWR) and reflection coefficient (Γ).".
- Return_loss label "Return loss".
- Return_loss label "Return loss".
- Return_loss label "反射損失".
- Return_loss sameAs Kehilangan_balik.
- Return_loss sameAs Return_loss.
- Return_loss sameAs 反射損失.
- Return_loss sameAs m.0bfxj.
- Return_loss sameAs Q3933836.
- Return_loss sameAs Q3933836.
- Return_loss sameAs Return_loss.
- Return_loss wasDerivedFrom Return_loss?oldid=603690874.
- Return_loss isPrimaryTopicOf Return_loss.