Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Rip_saw> ?p ?o. }
Showing items 1 to 25 of
25
with 100 items per page.
- Rip_saw abstract "A rip saw is a wood saw that is specially designed for making a rip cut, a cut made parallel to the direction of the wood grain.The cutting edge of each tooth has a flat front edge and it is not angled forward or backward. This design allows each tooth to act like a chisel (rather than being knife-like, as with a crosscut saw), preventing the saw from following grain lines, which could curve the path of the saw. By acting like a chisel, the saw can more easily cut across deviating grain lines, which is necessary if a straight cut is to be achieved. Rip saws typically have 4-10 teeth per inch, making them relatively coarse.All sawmills use rip saws of various types including the circular saw and band saw. Historically sawmills used one or more reciprocating saws more specifically known as an "up-and-down" or "upright saw" which are of two basic types, the frame saw or a muley (mulay) saw which is similar to the hand powered pit saw. Some sawmills also use crosscut saws to cut boards and planks to length.On the vast majority of saws throughout the world, the teeth are designed to cut when the saw is being pushed through the wood (on the push stroke or down stroke). However, some saws (such as Japanese saws and the saws used by Ancient Egyptians) are designed to cut on the pull stroke.".
- Rip_saw thumbnail Ripsaw.JPG?width=300.
- Rip_saw wikiPageID "1241989".
- Rip_saw wikiPageRevisionID "600182206".
- Rip_saw hasPhotoCollection Rip_saw.
- Rip_saw subject Category:Saws.
- Rip_saw subject Category:Woodworking_hand_tools.
- Rip_saw type Artifact100021939.
- Rip_saw type HandTool103489162.
- Rip_saw type Implement103563967.
- Rip_saw type Instrumentality103575240.
- Rip_saw type Object100002684.
- Rip_saw type PhysicalEntity100001930.
- Rip_saw type Tool104451818.
- Rip_saw type Whole100003553.
- Rip_saw type WoodworkingHandTools.
- Rip_saw comment "A rip saw is a wood saw that is specially designed for making a rip cut, a cut made parallel to the direction of the wood grain.The cutting edge of each tooth has a flat front edge and it is not angled forward or backward. This design allows each tooth to act like a chisel (rather than being knife-like, as with a crosscut saw), preventing the saw from following grain lines, which could curve the path of the saw.".
- Rip_saw label "Rip saw".
- Rip_saw sameAs m.04lhn3.
- Rip_saw sameAs Q7335553.
- Rip_saw sameAs Q7335553.
- Rip_saw sameAs Rip_saw.
- Rip_saw wasDerivedFrom Rip_saw?oldid=600182206.
- Rip_saw depiction Ripsaw.JPG.
- Rip_saw isPrimaryTopicOf Rip_saw.
