Matches in DBpedia 2014 for { <http://dbpedia.org/resource/SCSI_high_byte_termination> ?p ?o. }
Showing items 1 to 14 of
14
with 100 items per page.
- SCSI_high_byte_termination abstract "In SCSI computer systems, there is a special case with mixed 8-bit and 16-bit devices where high-byte termination may be required. Most parallel SCSI buses are terminated at each end. However where the bus width is not constant, it is sometimes necessary to provide special termination for the high byte and the associated parity bit. This high-byte termination can use standard SCSI termination techniques, such as a passive terminator, active terminator, or a forced-perfect terminator. This diagram shows a typical SCSI high-byte termination scheme:File:High byte termination.JPGThere is a simplification to this which is sometimes used in the case where there is only one 16-bit (wide) device connected to one or more 8-bit (narrow) devices. Then it is possible to wire all the eight spare data bits and the ninth parity bit together and to terminate them with a single resistor circuit to TERMPOWER. So in the case of a differential SCSI bus, it is possible to terminate all 18 spare signal wires with just one resistor. This method is not considered good practice, but has been successfully used in some SCSI products.".
- SCSI_high_byte_termination thumbnail High_byte_termination.JPG?width=300.
- SCSI_high_byte_termination wikiPageID "5298265".
- SCSI_high_byte_termination wikiPageRevisionID "525621502".
- SCSI_high_byte_termination hasPhotoCollection SCSI_high_byte_termination.
- SCSI_high_byte_termination subject Category:SCSI.
- SCSI_high_byte_termination comment "In SCSI computer systems, there is a special case with mixed 8-bit and 16-bit devices where high-byte termination may be required. Most parallel SCSI buses are terminated at each end. However where the bus width is not constant, it is sometimes necessary to provide special termination for the high byte and the associated parity bit. This high-byte termination can use standard SCSI termination techniques, such as a passive terminator, active terminator, or a forced-perfect terminator.".
- SCSI_high_byte_termination label "SCSI high byte termination".
- SCSI_high_byte_termination sameAs m.0dd740.
- SCSI_high_byte_termination sameAs Q7389321.
- SCSI_high_byte_termination sameAs Q7389321.
- SCSI_high_byte_termination wasDerivedFrom SCSI_high_byte_termination?oldid=525621502.
- SCSI_high_byte_termination depiction High_byte_termination.JPG.
- SCSI_high_byte_termination isPrimaryTopicOf SCSI_high_byte_termination.
