Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Shoulder_plane> ?p ?o. }
Showing items 1 to 33 of
33
with 100 items per page.
- Shoulder_plane abstract "The shoulder plane is a plane tool with a blade flush with the edges of the plane, allowing trimming right up to the edge of a workpiece. Like a rebate plane, the shoulder plane's blade extends, therefore cuts, to the full width of the tool. The shoulder plane is used to trim the shoulders and faces of tenons. It is used when it is necessary to trim right into the concave corner where two surfaces of the same piece of wood meet perpendicularly. It is also commonly used to clean up dadoes (housings) and tenons for joinery.Unlike the rebate plane, the shoulder plane is intended to cut end grain. There are therefore differences between it and a rebate plane in the angles at which the iron (blade) is set. There is a more acute angle between the iron and the sole of the tool. The iron is set square across the tool rather than obliquely. The iron is set face down. The ground and honed bevel forming the edge is uppermost.A shoulder plane also has a much finer set mouth, which allows finer shavings to be taken.".
- Shoulder_plane thumbnail BullnoseShoulderPlane.jpg?width=300.
- Shoulder_plane wikiPageExternalLink sPlanes1.asp.
- Shoulder_plane wikiPageID "452984".
- Shoulder_plane wikiPageRevisionID "574233732".
- Shoulder_plane hasPhotoCollection Shoulder_plane.
- Shoulder_plane subject Category:Planes.
- Shoulder_plane type Aircraft102686568.
- Shoulder_plane type Airplane102691156.
- Shoulder_plane type Artifact100021939.
- Shoulder_plane type Conveyance103100490.
- Shoulder_plane type Craft103125870.
- Shoulder_plane type Heavier-than-airCraft103510583.
- Shoulder_plane type Instrumentality103575240.
- Shoulder_plane type Object100002684.
- Shoulder_plane type PhysicalEntity100001930.
- Shoulder_plane type Planes.
- Shoulder_plane type Vehicle104524313.
- Shoulder_plane type Whole100003553.
- Shoulder_plane comment "The shoulder plane is a plane tool with a blade flush with the edges of the plane, allowing trimming right up to the edge of a workpiece. Like a rebate plane, the shoulder plane's blade extends, therefore cuts, to the full width of the tool. The shoulder plane is used to trim the shoulders and faces of tenons. It is used when it is necessary to trim right into the concave corner where two surfaces of the same piece of wood meet perpendicularly.".
- Shoulder_plane label "Guillaume (outil)".
- Shoulder_plane label "Shoulder plane".
- Shoulder_plane label "Simshobel".
- Shoulder_plane label "Зензубель".
- Shoulder_plane sameAs Simshobel.
- Shoulder_plane sameAs Guillaume_(outil).
- Shoulder_plane sameAs m.02bb9c.
- Shoulder_plane sameAs Q838095.
- Shoulder_plane sameAs Q838095.
- Shoulder_plane sameAs Shoulder_plane.
- Shoulder_plane wasDerivedFrom Shoulder_plane?oldid=574233732.
- Shoulder_plane depiction BullnoseShoulderPlane.jpg.
- Shoulder_plane isPrimaryTopicOf Shoulder_plane.
