Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Sintered_polyethylene> ?p ?o. }
Showing items 1 to 23 of
23
with 100 items per page.
- Sintered_polyethylene abstract "Sinter plate filter elements were developed in Germany during the years of 1981 and 1982. These rigid filter elements are used in dust collectors and will produce clean gas values of 0.1 to 1.0 mg/m3 with emissions of 0.001 pounds per hour with a maximum of 0.0004 gr/ft3, even with dusts of D50 < 1 µm. The EPA [1] defines high efficiency as removal of 0 to 5.0 µm particulates. [2]The filter element matrix consists of molded sintered polyethylene (PE) with a reinforced mounting header. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking surface resulting in surface-loaded filtration. This combined material is chemical resistant and unaffected by slight moisture. The rigid sinter plate filters have an extremely stable structure and can be recycled. The average useful life of a sinter plate filter element can exceed 10 years.Sinter plate PE filter elements are environmentally compatible. They produce no toxic waste in themselves and can be washed off and reused. There is no contamination of material from filter fibers like fabric and cartridge media elements. Dust collector#Fabric CollectorsThe rigidity of the matrix results in no wear from abrasive material. Cleaning is accomplished by on-line, low-pressure reverse air jet-pulse. Standard elements will handle temperatures up to 158 °F with improved elements designed for up to 230 °FThe separation efficiency exceeds that required by the BIA-certificate regarding dust classification M.".
- Sintered_polyethylene wikiPageExternalLink www.epa.gov.
- Sintered_polyethylene wikiPageExternalLink ffadvantages.
- Sintered_polyethylene wikiPageID "12214389".
- Sintered_polyethylene wikiPageRevisionID "601772248".
- Sintered_polyethylene hasPhotoCollection Sintered_polyethylene.
- Sintered_polyethylene subject Category:Filters.
- Sintered_polyethylene type Artifact100021939.
- Sintered_polyethylene type Device103183080.
- Sintered_polyethylene type Filter103339643.
- Sintered_polyethylene type Filters.
- Sintered_polyethylene type Instrumentality103575240.
- Sintered_polyethylene type Object100002684.
- Sintered_polyethylene type PhysicalEntity100001930.
- Sintered_polyethylene type Whole100003553.
- Sintered_polyethylene comment "Sinter plate filter elements were developed in Germany during the years of 1981 and 1982. These rigid filter elements are used in dust collectors and will produce clean gas values of 0.1 to 1.0 mg/m3 with emissions of 0.001 pounds per hour with a maximum of 0.0004 gr/ft3, even with dusts of D50 < 1 µm. The EPA [1] defines high efficiency as removal of 0 to 5.0 µm particulates. [2]The filter element matrix consists of molded sintered polyethylene (PE) with a reinforced mounting header.".
- Sintered_polyethylene label "Sintered polyethylene".
- Sintered_polyethylene sameAs m.02vw3rl.
- Sintered_polyethylene sameAs Q7525109.
- Sintered_polyethylene sameAs Q7525109.
- Sintered_polyethylene sameAs Sintered_polyethylene.
- Sintered_polyethylene wasDerivedFrom Sintered_polyethylene?oldid=601772248.
- Sintered_polyethylene isPrimaryTopicOf Sintered_polyethylene.