Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Spin_coating> ?p ?o. }
Showing items 1 to 35 of
35
with 100 items per page.
- Spin_coating abstract "Spin coating is a procedure used to deposit uniform thin films to flat substrates. Usually a small amount of coating material is applied on the center of the substrate, which is either spinning at low speed or not spinning at all. The substrate is then rotated at high speed in order to spread the coating material by centrifugal force. A machine used for spin coating is called a spin coater, or simply spinner. Rotation is continued while the fluid spins off the edges of the substrate, until the desired thickness of the film is achieved. The applied solvent is usually volatile, and simultaneously evaporates. So, the higher the angular speed of spinning, the thinner the film. The thickness of the film also depends on the viscosity and concentration of the solution and the solvent. Spin coating is widely used in microfabrication of oxide layers using sol-gel precursors, where it can be used to create uniform thin films with nanoscale thicknesses. It is used intensively in photolithography, to deposit layers of photoresist about 1 micrometre thick. Photoresist is typically spun at 20 to 80 revolutions per second for 30 to 60 seconds.".
- Spin_coating thumbnail Spinner.jpg?width=300.
- Spin_coating wikiPageExternalLink Underhill_PolyEngSci_1998.pdf.
- Spin_coating wikiPageID "2436311".
- Spin_coating wikiPageRevisionID "604588438".
- Spin_coating hasPhotoCollection Spin_coating.
- Spin_coating subject Category:Industrial_processes.
- Spin_coating subject Category:Semiconductor_device_fabrication.
- Spin_coating subject Category:Thin_film_deposition.
- Spin_coating type IndustrialProcess113497928.
- Spin_coating type IndustrialProcesses.
- Spin_coating type PhysicalEntity100001930.
- Spin_coating type Process100029677.
- Spin_coating comment "Spin coating is a procedure used to deposit uniform thin films to flat substrates. Usually a small amount of coating material is applied on the center of the substrate, which is either spinning at low speed or not spinning at all. The substrate is then rotated at high speed in order to spread the coating material by centrifugal force. A machine used for spin coating is called a spin coater, or simply spinner.".
- Spin_coating label "Enduction centrifuge".
- Spin_coating label "Rivestimento per rotazione".
- Spin_coating label "Rotationsbeschichtung".
- Spin_coating label "Spin coating".
- Spin_coating label "Spin-coater".
- Spin_coating label "Spincoating".
- Spin_coating label "スピンコート".
- Spin_coating label "旋转涂覆".
- Spin_coating sameAs Rotationsbeschichtung.
- Spin_coating sameAs Enduction_centrifuge.
- Spin_coating sameAs Rivestimento_per_rotazione.
- Spin_coating sameAs スピンコート.
- Spin_coating sameAs Spincoating.
- Spin_coating sameAs Spin-coater.
- Spin_coating sameAs m.07cwqs.
- Spin_coating sameAs Q1305254.
- Spin_coating sameAs Q1305254.
- Spin_coating sameAs Spin_coating.
- Spin_coating wasDerivedFrom Spin_coating?oldid=604588438.
- Spin_coating depiction Spinner.jpg.
- Spin_coating isPrimaryTopicOf Spin_coating.
