Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Spring_Back_Compensation> ?p ?o. }
Showing items 1 to 15 of
15
with 100 items per page.
- Spring_Back_Compensation abstract "Due to the plastic-elastic forming of a workpiece, there is a spring back at the end of a bending process.The spring back has to be compensated to achieve an accurate result.Usually that is realized by overbending the material correspondent to the height of the spring back.That means for the practical side of the bending process, the bending former enters deeper into the bending prism.In the case of complex tools the spring back has to be already considered in the construction phase. Therefore complex software simulations are used.Frequently this is not enough to deliver the desired results. In such cases practical experiments are done, using the trial-and-error plus experience method to correct the tool.However the results (workpieces) are only stable, if all influencing factors are the same. (ETH Zürich, p. 67)This mainly includes: Chemical composition Structure of the material (e.g. direction of grain during production process) Wear of tools Material temperature Aging processes of the raw material (e.g. significant for aluminium and copper) deformation rateThe list of factors can be continued.".
- Spring_Back_Compensation thumbnail Bending_tool_for_Standard_bending_EHRT.jpg?width=300.
- Spring_Back_Compensation wikiPageID "39401577".
- Spring_Back_Compensation wikiPageRevisionID "592696159".
- Spring_Back_Compensation subject Category:Fabrication_(metal).
- Spring_Back_Compensation subject Category:Metal_forming.
- Spring_Back_Compensation subject Category:Metalworking_tools.
- Spring_Back_Compensation comment "Due to the plastic-elastic forming of a workpiece, there is a spring back at the end of a bending process.The spring back has to be compensated to achieve an accurate result.Usually that is realized by overbending the material correspondent to the height of the spring back.That means for the practical side of the bending process, the bending former enters deeper into the bending prism.In the case of complex tools the spring back has to be already considered in the construction phase.".
- Spring_Back_Compensation label "Spring Back Compensation".
- Spring_Back_Compensation sameAs m.0vpy3nj.
- Spring_Back_Compensation sameAs Q17141469.
- Spring_Back_Compensation sameAs Q17141469.
- Spring_Back_Compensation wasDerivedFrom Spring_Back_Compensation?oldid=592696159.
- Spring_Back_Compensation depiction Bending_tool_for_Standard_bending_EHRT.jpg.
- Spring_Back_Compensation isPrimaryTopicOf Spring_Back_Compensation.
