Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Table_engine> ?p ?o. }
Showing items 1 to 34 of
34
with 100 items per page.
- Table_engine abstract "A table engine is a variety of stationary steam engine where the cylinder is placed on top of a table-shaped base, the legs of which stand on the baseplate which locates the crankshaft bearings. The piston rod protrudes from the top of the cylinder and has fixed to it a cross-head which runs in slides attached to, and rising from, the cylinder top. Long return rods connect the crosshead to the crankshaft, on which is fixed the flywheel.This pattern of engine was first introduced by James Sadler in the Portsmouth Block Mills and was house-built in that its framing was formed by the engine house, as had been common practice for beam engines.Henry Maudslay patented an improved version of this a few years later, and other makers adopted the configuration.It was supplied for low-speed, low-power applications around the first half of the nineteenth century. They continued to be made in a range of sizes, down to very small, with a bore and stroke of only a few inches.The table engine was one of the first types where the engine was constructed as an independent unit, rather than being house-built. This made the engines cheaper, and more importantly quicker, to erect on site. Entire engines could be built and tested at their factory before delivery. Engines could also be pre-built, then offered for sale from stock, rather than having to be designed and cosntructed for each site.One reason for the continued use of a vertical cylinder was the belief that with a horizontal cylinder, the weight of the piston within the cylinder would lead to uneven wear on the lower bore of the cylinder. This erroneous view was not dispelled until around 1830 and the increasing number of steam locomotives using horizontal cylinders without such wear problems.".
- Table_engine thumbnail Geograph-1687594-by-Chris-Allen.jpg?width=300.
- Table_engine wikiPageExternalLink section13.asp.
- Table_engine wikiPageID "869422".
- Table_engine wikiPageRevisionID "605318600".
- Table_engine group "note".
- Table_engine hasPhotoCollection Table_engine.
- Table_engine liststyle "lower-roman".
- Table_engine subject Category:Stationary_steam_engines.
- Table_engine subject Category:Steam_engines.
- Table_engine subject Category:Steam_engines_by_layout.
- Table_engine type Artifact100021939.
- Table_engine type Device103183080.
- Table_engine type Engine103287733.
- Table_engine type External-combustionEngine103307573.
- Table_engine type HeatEngine103507963.
- Table_engine type Instrumentality103575240.
- Table_engine type Machine103699975.
- Table_engine type Motor103789946.
- Table_engine type Object100002684.
- Table_engine type PhysicalEntity100001930.
- Table_engine type StationarySteamEngines.
- Table_engine type SteamEngine104309049.
- Table_engine type SteamEngines.
- Table_engine type Whole100003553.
- Table_engine comment "A table engine is a variety of stationary steam engine where the cylinder is placed on top of a table-shaped base, the legs of which stand on the baseplate which locates the crankshaft bearings. The piston rod protrudes from the top of the cylinder and has fixed to it a cross-head which runs in slides attached to, and rising from, the cylinder top.".
- Table_engine label "Table engine".
- Table_engine sameAs m.03k3tb.
- Table_engine sameAs Q7673196.
- Table_engine sameAs Q7673196.
- Table_engine sameAs Table_engine.
- Table_engine wasDerivedFrom Table_engine?oldid=605318600.
- Table_engine depiction Geograph-1687594-by-Chris-Allen.jpg.
- Table_engine isPrimaryTopicOf Table_engine.
