Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Tonnage_monitor> ?p ?o. }
Showing items 1 to 22 of
22
with 100 items per page.
- Tonnage_monitor abstract "A tonnage monitor is a meter used on a stamping press to measure the force applied by the ram. In a press, the cutting and forming tools in the die will wear down, requiring increasing effort to stamp the part. A tonnage monitor allows the user to observe this degradation and decide when it is time to sharpen and adjust the die. It generally uses strain gauges attached to the frame or tie rods of the press. The gauges provide an electric signal by means of piezoelectric effect as they are stretched during press operation.The tonnage monitor may provide any of the following additional features: Warning indication when the load exceeds a setpoint A press stop signal to halt the press at the top of the stroke for when the load exceeds a set point. This signal is generally used to watch for sudden events such as a tool breaking or a part becoming jammed. Recording of successive press hits to show the operational trend Graphing of a single stroke. With a progressive die, such a graph can be used by the tool and die maker to view the operation of the different cutting pieces and thereby optimize tool performance.".
- Tonnage_monitor wikiPageID "19462315".
- Tonnage_monitor wikiPageRevisionID "532059598".
- Tonnage_monitor hasPhotoCollection Tonnage_monitor.
- Tonnage_monitor subject Category:Machine_tools.
- Tonnage_monitor type Artifact100021939.
- Tonnage_monitor type Device103183080.
- Tonnage_monitor type Instrumentality103575240.
- Tonnage_monitor type Machine103699975.
- Tonnage_monitor type MachineTool103702248.
- Tonnage_monitor type MachineTools.
- Tonnage_monitor type Object100002684.
- Tonnage_monitor type PhysicalEntity100001930.
- Tonnage_monitor type Whole100003553.
- Tonnage_monitor comment "A tonnage monitor is a meter used on a stamping press to measure the force applied by the ram. In a press, the cutting and forming tools in the die will wear down, requiring increasing effort to stamp the part. A tonnage monitor allows the user to observe this degradation and decide when it is time to sharpen and adjust the die. It generally uses strain gauges attached to the frame or tie rods of the press.".
- Tonnage_monitor label "Tonnage monitor".
- Tonnage_monitor sameAs m.04n315w.
- Tonnage_monitor sameAs Q7821579.
- Tonnage_monitor sameAs Q7821579.
- Tonnage_monitor sameAs Tonnage_monitor.
- Tonnage_monitor wasDerivedFrom Tonnage_monitor?oldid=532059598.
- Tonnage_monitor isPrimaryTopicOf Tonnage_monitor.