Matches in DBpedia 2014 for { <http://dbpedia.org/resource/ZX_Printer> ?p ?o. }
Showing items 1 to 35 of
35
with 100 items per page.
- ZX_Printer abstract "The Sinclair ZX Printer is a spark printer which was produced by Sinclair Research for its ZX81 home computer. It was launched in 1981, with a recommended retail price of £49.95.The ZX Printer used special 4-inch (100 mm) wide black paper which was supplied coated with a thin layer of aluminium. To mark the paper, one of the printer's two styluses passed a current through a small area of the aluminium layer, causing the aluminium to evaporate and reveal the black under-surface. The printer's horizontal resolution was the same as the ZX81's video display, i.e. 256 dots (pixels) or 32 characters (using the standard character definition). The print quality was crude, but no other printer was compatible with the ZX81 without the use of additional software and interface hardware.[citation needed]The ZX Printer was also compatible with the earlier ZX80 computer (when fitted with the 8kB ROM upgrade) and the later ZX Spectrum, and plugged directly into the expansion bus connector via a short cable. The expansion bus was duplicated on the outside of the printer's connector, allowing other peripherals to be connected concurrently. The printer drew its power directly from the expansion bus, and was sold with a larger (1-2A) power supply for the ZX81 to accommodate the additional power drain. The Spectrum's user manual noted that this was not needed for the Spectrum as its default 1.1A power supply was sufficient.".
- ZX_Printer thumbnail Sinclair.zx.thermal.printer.jpg?width=300.
- ZX_Printer wikiPageExternalLink zxprinter.htm.
- ZX_Printer wikiPageExternalLink zx81_sst.htm.
- ZX_Printer wikiPageExternalLink Printers.
- ZX_Printer wikiPageExternalLink www.zx81museum.net.
- ZX_Printer wikiPageID "20392362".
- ZX_Printer wikiPageRevisionID "598237772".
- ZX_Printer hasPhotoCollection ZX_Printer.
- ZX_Printer subject Category:Home_computer_peripherals.
- ZX_Printer subject Category:Sinclair_Research.
- ZX_Printer type Artifact100021939.
- ZX_Printer type ElectronicEquipment103278248.
- ZX_Printer type Equipment103294048.
- ZX_Printer type HomeComputerPeripherals.
- ZX_Printer type Instrumentality103575240.
- ZX_Printer type Object100002684.
- ZX_Printer type Peripheral103916720.
- ZX_Printer type PhysicalEntity100001930.
- ZX_Printer type Whole100003553.
- ZX_Printer comment "The Sinclair ZX Printer is a spark printer which was produced by Sinclair Research for its ZX81 home computer. It was launched in 1981, with a recommended retail price of £49.95.The ZX Printer used special 4-inch (100 mm) wide black paper which was supplied coated with a thin layer of aluminium. To mark the paper, one of the printer's two styluses passed a current through a small area of the aluminium layer, causing the aluminium to evaporate and reveal the black under-surface.".
- ZX_Printer label "ZX Printer".
- ZX_Printer label "ZX Printer".
- ZX_Printer label "ZX Printer".
- ZX_Printer label "ZX Printer".
- ZX_Printer sameAs ZX_Printer.
- ZX_Printer sameAs ZX_Printer.
- ZX_Printer sameAs ZX_Printer.
- ZX_Printer sameAs m.04_00v0.
- ZX_Printer sameAs Q2983427.
- ZX_Printer sameAs Q2983427.
- ZX_Printer sameAs ZX_Printer.
- ZX_Printer wasDerivedFrom ZX_Printer?oldid=598237772.
- ZX_Printer depiction Sinclair.zx.thermal.printer.jpg.
- ZX_Printer isPrimaryTopicOf ZX_Printer.
