Matches in DBpedia 2014 for { <http://dbpedia.org/resource/Zero-ohm_link> ?p ?o. }
Showing items 1 to 24 of
24
with 100 items per page.
- Zero-ohm_link abstract "A zero-ohm link or zero-ohm resistor is a wire link used to connect traces on a printed circuit board that is packaged in the same physical package format as a resistor. This format allows it to be placed on the circuit board using the same automated equipment used to place other resistors, instead of requiring a separate machine to install a jumper or other wire. Zero-ohm resistors may be packaged like cylindrical resistors, or like surface-mount resistors.One use is to allow traces on the same side of a PCB to cross: one trace has a zero-ohm resistor while the second trace runs in between the leads of the resistor, avoiding contact with the first trace. A second use is as a configuration jumper to select different operation modes of a printed circuit board. Sometimes, a zero-ohm link may be used as an ad hoc low-cost kind of a fuse.[citation needed]The resistance is only approximately zero; only a maximum (typically 10–50 mΩ) is specified. A fractional tolerance would not make sense, as it would be specified as a percentage of the ideal value of zero ohms (which would always be infinite), so it is not specified.An axial-lead through-hole zero-ohm resistor is generally marked with a single black band, the symbol for "0" in the resistor color code. Surface-mount resistors are generally marked with a single "0" or "000".".
- Zero-ohm_link thumbnail 0-ohm.jpg?width=300.
- Zero-ohm_link wikiPageID "12735789".
- Zero-ohm_link wikiPageRevisionID "605940152".
- Zero-ohm_link hasPhotoCollection Zero-ohm_link.
- Zero-ohm_link subject Category:Resistive_components.
- Zero-ohm_link type Abstraction100002137.
- Zero-ohm_link type Cognition100023271.
- Zero-ohm_link type Component105868954.
- Zero-ohm_link type Concept105835747.
- Zero-ohm_link type Content105809192.
- Zero-ohm_link type Idea105833840.
- Zero-ohm_link type Part105867413.
- Zero-ohm_link type PsychologicalFeature100023100.
- Zero-ohm_link type ResistiveComponents.
- Zero-ohm_link comment "A zero-ohm link or zero-ohm resistor is a wire link used to connect traces on a printed circuit board that is packaged in the same physical package format as a resistor. This format allows it to be placed on the circuit board using the same automated equipment used to place other resistors, instead of requiring a separate machine to install a jumper or other wire.".
- Zero-ohm_link label "Zero-ohm link".
- Zero-ohm_link sameAs m.02x2n5t.
- Zero-ohm_link sameAs Q8069455.
- Zero-ohm_link sameAs Q8069455.
- Zero-ohm_link sameAs Zero-ohm_link.
- Zero-ohm_link wasDerivedFrom Zero-ohm_link?oldid=605940152.
- Zero-ohm_link depiction 0-ohm.jpg.
- Zero-ohm_link isPrimaryTopicOf Zero-ohm_link.
