Data Portal @ linkeddatafragments.org

Matches in Library of Congress for { <http://lccn.loc.gov/2008034573> ?p ?o. }

• 2008034573 contributor B11112592.
• 2008034573 created "c2008.".
• 2008034573 date "2008".
• 2008034573 date "c2008.".
• 2008034573 dateCopyrighted "c2008.".
• 2008034573 description "Cover -- Acknowledgments -- About the Authors -- Contents at a Glance -- Contents -- Introduction -- Who Should Read This Book -- The Mastering Series -- What Is Covered in This Book -- How to Contact the Authors -- Chapter 1: Inventor Design Philosophy -- Moving from the AutoCAD Environment -- Using the Inventor Graphical Interface -- Learning the File Types in Inventor -- Building a 3D Virtual Prototype -- Understanding Parametric Design -- Understanding Functional Design -- Understanding Solids vs. Surface Modeling -- Best Practices in Autodesk Inventor -- The Bottom Line -- Chapter 2: Data and Projects -- Creating a Data Structure -- Creating the Project File -- The Bottom Line -- Chapter 3: Sketch Techniques -- Application Options and Settings for Parts and Sketches -- Creating a New Part File from a Template -- Preserving Design Intent -- Creating a Basic 2D Sketch -- Using Construction Geometry -- Creating Sketches from Auto CAD Geometry -- Creating and Using 3D Sketches -- The Bottom Line -- Chapter 4: Basic Modeling Techniques -- Exploring Application Options and Settings for Part Modeling -- Creating Basic Part Features -- Modifying Existing Part Features -- Creating and Using Work Features -- The Bottom Line -- Chapter 5: Advanced Modeling Techniques -- Complex Sweeps and Lofts -- Turned Parts and Threads -- Cast and Plastic Parts -- Part Tolerances -- Setting Global File Tolerances -- Overriding Current Tolerances -- Parameters and iProperties -- Part Parameters -- Part Analysis -- Working with Base Solids -- Troubleshooting Failures -- The Bottom Line -- Chapter 6: Sheet Metal -- Getting to Know the Features -- Using Sheet Metal Templates and Rules -- Authoring and Reusing Punches -- Leveraging the Flat Pattern -- Sheet Metal iPart Factories -- Modeling with Non-Sheet-Metal Features -- Working with Imported Parts -- Annotating Your Sheet Metal Design -- Harvesting Legacy Sheet Metal Templates -- The Bottom Line -- Chapter 7: Part and Feature Reuse -- Working with iParts -- Working with iFeatures -- Reusing Existing Geometry -- Introducing Content Center -- The Bottom Line -- Chapter 8: Assembly Design Workflows -- Understanding Subassemblies -- Top-Down Design -- Adaptivity -- 3D Constraints -- Assembly Features -- Managing the Bill of Materials -- Assembly Reuse and Configurations -- Representations -- The Bottom Line -- Chapter 9: Large Assembly Strategies -- Selecting a Workstation -- Working with Performance Settings -- Working with General Settings -- Large Assembly Best Practices -- Managing Assembly Detail -- Simplifying Parts -- The Bottom Line -- Chapter 10: Weldment Design -- Exploring Weldment Design Methodologies -- Modeling Preparations -- Cosmetic Welds -- Creating Weld Beads -- Creating Fillet Welds -- Creating Groove Welds -- Performing Machining Operations -- Exploring Weld Properties and Combinations -- Using the Weld Symbol -- Bead Property Report and Mass Properties -- Drawing Documentation -- Bill of Materials and Parts List -- The Bottom Line -- Chapter 11: Functional Design -- Geometric Modeling vs. Functional Design -- Design Accelera.".
• 2008034573 extent "xxv, 574 p. :".
• 2008034573 identifier "0470293144 (pbk. : website)".
• 2008034573 identifier "9780470293140 (pbk. : website)".
• 2008034573 identifier F?func=service&doc_library=BVB01&doc_number=017545149&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
• 2008034573 identifier 2008034573.html.
• 2008034573 isPartOf "Serious skills.".
• 2008034573 isPartOf "Sybex serious skills".
• 2008034573 issued "2008".
• 2008034573 issued "c2008.".
• 2008034573 language "eng".
• 2008034573 publisher "Indianapolis, Ind. : Wiley Pub.,".
• 2008034573 subject "620/.00420285536 22".
• 2008034573 subject "Autodesk Inventor (Electronic resource)".
• 2008034573 subject "Engineering graphics.".
• 2008034573 subject "Engineering models Data processing.".
• 2008034573 subject "T353 .M42 2008".
• 2008034573 tableOfContents "Cover -- Acknowledgments -- About the Authors -- Contents at a Glance -- Contents -- Introduction -- Who Should Read This Book -- The Mastering Series -- What Is Covered in This Book -- How to Contact the Authors -- Chapter 1: Inventor Design Philosophy -- Moving from the AutoCAD Environment -- Using the Inventor Graphical Interface -- Learning the File Types in Inventor -- Building a 3D Virtual Prototype -- Understanding Parametric Design -- Understanding Functional Design -- Understanding Solids vs. Surface Modeling -- Best Practices in Autodesk Inventor -- The Bottom Line -- Chapter 2: Data and Projects -- Creating a Data Structure -- Creating the Project File -- The Bottom Line -- Chapter 3: Sketch Techniques -- Application Options and Settings for Parts and Sketches -- Creating a New Part File from a Template -- Preserving Design Intent -- Creating a Basic 2D Sketch -- Using Construction Geometry -- Creating Sketches from Auto CAD Geometry -- Creating and Using 3D Sketches -- The Bottom Line -- Chapter 4: Basic Modeling Techniques -- Exploring Application Options and Settings for Part Modeling -- Creating Basic Part Features -- Modifying Existing Part Features -- Creating and Using Work Features -- The Bottom Line -- Chapter 5: Advanced Modeling Techniques -- Complex Sweeps and Lofts -- Turned Parts and Threads -- Cast and Plastic Parts -- Part Tolerances -- Setting Global File Tolerances -- Overriding Current Tolerances -- Parameters and iProperties -- Part Parameters -- Part Analysis -- Working with Base Solids -- Troubleshooting Failures -- The Bottom Line -- Chapter 6: Sheet Metal -- Getting to Know the Features -- Using Sheet Metal Templates and Rules -- Authoring and Reusing Punches -- Leveraging the Flat Pattern -- Sheet Metal iPart Factories -- Modeling with Non-Sheet-Metal Features -- Working with Imported Parts -- Annotating Your Sheet Metal Design -- Harvesting Legacy Sheet Metal Templates -- The Bottom Line -- Chapter 7: Part and Feature Reuse -- Working with iParts -- Working with iFeatures -- Reusing Existing Geometry -- Introducing Content Center -- The Bottom Line -- Chapter 8: Assembly Design Workflows -- Understanding Subassemblies -- Top-Down Design -- Adaptivity -- 3D Constraints -- Assembly Features -- Managing the Bill of Materials -- Assembly Reuse and Configurations -- Representations -- The Bottom Line -- Chapter 9: Large Assembly Strategies -- Selecting a Workstation -- Working with Performance Settings -- Working with General Settings -- Large Assembly Best Practices -- Managing Assembly Detail -- Simplifying Parts -- The Bottom Line -- Chapter 10: Weldment Design -- Exploring Weldment Design Methodologies -- Modeling Preparations -- Cosmetic Welds -- Creating Weld Beads -- Creating Fillet Welds -- Creating Groove Welds -- Performing Machining Operations -- Exploring Weld Properties and Combinations -- Using the Weld Symbol -- Bead Property Report and Mass Properties -- Drawing Documentation -- Bill of Materials and Parts List -- The Bottom Line -- Chapter 11: Functional Design -- Geometric Modeling vs. Functional Design -- Design Accelera.".
• 2008034573 title "Mastering Autodesk Inventor 2009 and Autodesk Inventor LT 2009 / Curtis Waguespack ... [et al.].".
• 2008034573 type "text".